Dissertation · 2017 · Open access

The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms

J. S. Frouws

Research Repository (Delft University of Technology) · Published 1 January 2017

Open full textCite this paper

In brief

“The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms” is a 2017 dissertation by J. S. Frouws, published in Research Repository (Delft University of Technology). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Research Repository (Delft University of Technology).

Citations
0
References
26
Authors
1

Abstract

This work introduces a new method to deal with design dependent pressure loads in Topology Optimisation (TO) using the SIMP material model. A pronounced focus is on optimising pressure actuated compliant mechanisms. The difficulty herein is the interpretation of the pressure boundary in a TO design. In TO the boundaries are blurry, because of the filtering of the design variables, which is necessary to prevent checkerboarding. Another reason why the boundary is poorly defined is that the optimisation starts from an equally distributed grey, where black and white respectively are solid and void, so the boundary is either the domain boundary or not defined in early iterations of the optimisation. The methods proposed in literature often try to find the void-solid interface exposed to the pressure source to apply the loading from a pressure line directly. The method proposed in this work, appropriately called the Darcy method, first calculates the pressure field by using Darcy's law governing the flow through porous media and the associated pressure drop. A flow coefficient is introduced that decreases if the virtual element density increases. This results in a design dependent pressure field that can be solved using the Finite Element Method (FEM), which can then be translated to consistent nodal forces that are applied to the TO problem. A drainage coefficient has also been introduced to make sure that the pressure is drained entirely to the environment pressure over the first encountered void-solid interface exposed to the pressure source. The Darcy method has proven to function well in several test cases. The method has been thoroughly tested using several parameter sweeps on a clamping problem objective. The parameters whose influence is examined are: the initial condition, the density threshold value, flow coefficient gradient at the threshold, output spring stiffness and the volume fraction. Subsequently, some alternative TO problems are solved showing the diversity of the method. In perspective of future research, the Darcy method can function as a great tool to research load sensitivities by tuning the pressure field control parameters. The extension of the Darcy method to 3D or to several load cases comes naturally but has not been tested in this work, this is also recommended for future research.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Frouws, J. S. (2017). The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56

MLA 9

Frouws, J. S. “The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms.” Research Repository (Delft University of Technology), 2017. http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56.

Chicago

Frouws, J. S. 2017. “The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms.” Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56.

Harvard

Frouws, J. S. (2017) ‘The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms’, Research Repository (Delft University of Technology). Available at: http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56.

IEEE

J. S. Frouws, “The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms,” Research Repository (Delft University of Technology), 2017.

BibTeX

@phdthesis{frouws2017darcy,
  title     = {{The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms}},
  author    = {Frouws, J. S.},
  year      = {2017},
  url       = {http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering

  • topology optimization
  • compliant mechanisms
  • Darcy's law
  • porous media flow
  • drainage coefficient
  • flow coefficient
  • density limit
  • load sensitivity

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Frouws, J. S. (2017). The Darcy method for Topology Optimisation of pressure actuated compliant mechanisms. Research Repository (Delft University of Technology). http://resolver.tudelft.nl/uuid:6de96f3e-5ca2-4011-bfe4-7e5e00d4eb56

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Research Repository (Delft University of Technology): sign in and open the full text from this page.

Who wrote this paper?

J. S. Frouws.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.