Journal article · 2026 · Open access

Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment

Sthefanie de Carvalho Mendes Lopes, Lucas Menezes de Souza, Anderson Oliveira Gadioli, César Augusto Siqueira Crespo Neto, Maria de Lourdes Soprani Vasconcellos, Elaine Cristina Pereira, Sergio N. Monteiro, Afonso R.G. Azevedo

Journal of Materials Research and Technology, 45, 7273–7287 · Published 1 November 2026 · DOI 10.1016/j.jmrt.2026.11.011

Open full textCite this paper

In brief

“Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment” is a 2026 journal article by Sthefanie de Carvalho Mendes Lopes and 7 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
0
References
104
Authors
8

Abstract

Tetramethylammonium iodide (TMAI), a structurally simple quaternary ammonium ionic liquid, was investigated as a corrosion inhibitor for UNS S31803 duplex stainless steel (DSS) in 1 M H 2 SO 4 solution. Unlike the complex ionic liquids commonly reported as corrosion inhibitors, the isolated use of TMAI for DSS in sulfuric acid has received little attention. Potentiodynamic polarization measurements and surface characterization were employed to evaluate its inhibition performance and protective mechanism. Potentiodynamic polarization results showed that TMAI significantly reduced the corrosion current density and corrosion rate, with inhibition efficiency increasing slightly with concentration and reaching a maximum of 99.50% at room temperature (298 K) and 5 × 10 −4 M. However, lower efficiencies of 73.16% at 313 K and 83.03% at 323 K were observed. The polarization curves indicated that TMAI acts predominantly as an anodic-type inhibitor. The adsorption data were consistent with the Langmuir isotherm within the investigated concentration range, while the thermodynamic analysis suggested spontaneous adsorption with a possible contribution from chemisorption. Scanning electron microscopy (SEM) analyses revealed a smoother and less damaged surface in the presence of TMAI, while energy-dispersive X-ray spectroscopy (EDS) detected elements associated with the inhibitor, supporting the formation of a protective surface layer. These findings demonstrate that a structurally simple quaternary ammonium iodide can provide effective corrosion protection for DSS in sulfuric acid, indicating the potential of TMAI as an alternative to more complex ionic liquid inhibitors.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lopes, S. D. C. M., de Souza, L. M., Gadioli, A. O., Neto, C. A. S. C., Vasconcellos, M. D. L. S., Pereira, E. C., Monteiro, S. N., & Azevedo, A. R. (2026). Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment. Journal of Materials Research and Technology, 45, 7273–7287. https://doi.org/10.1016/j.jmrt.2026.11.011

MLA 9

Lopes, Sthefanie de Carvalho Mendes, et al. “Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment.” Journal of Materials Research and Technology, vol. 45, 2026, pp. 7273–7287. https://doi.org/10.1016/j.jmrt.2026.11.011.

Chicago

Lopes, Sthefanie de Carvalho Mendes, Lucas Menezes de Souza, Anderson Oliveira Gadioli, César Augusto Siqueira Crespo Neto, Maria de Lourdes Soprani Vasconcellos, Elaine Cristina Pereira, Sergio N. Monteiro, and Afonso R.G. Azevedo. 2026. “Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment.” Journal of Materials Research and Technology 45: 7273–7287. https://doi.org/10.1016/j.jmrt.2026.11.011.

Harvard

Lopes, S. D. C. M. et al. (2026) ‘Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment’, Journal of Materials Research and Technology, 45, pp. 7273–7287. doi:10.1016/j.jmrt.2026.11.011.

IEEE

S. D. C. M. Lopes et al., “Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment,” Journal of Materials Research and Technology, vol. 45, pp. 7273–7287, 2026, doi: 10.1016/j.jmrt.2026.11.011.

BibTeX

@article{lopes2026tetramethylammonium,
  title     = {{Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment}},
  author    = {Lopes, Sthefanie de Carvalho Mendes and de Souza, Lucas Menezes and Gadioli, Anderson Oliveira and Neto, César Augusto Siqueira Crespo and Vasconcellos, Maria de Lourdes Soprani and Pereira, Elaine Cristina and Monteiro, Sergio N. and Azevedo, Afonso R.G.},
  journal   = {Journal of Materials Research and Technology},
  year      = {2026},
  volume    = {45},
  pages     = {7273--7287},
  doi       = {10.1016/j.jmrt.2026.11.011},
  url       = {https://doi.org/10.1016/j.jmrt.2026.11.011}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition

  • tetramethylammonium iodide
  • corrosion inhibitors
  • duplex stainless steel
  • 2205 duplex stainless steel
  • sulfuric acid corrosion
  • quaternary ammonium ionic liquids
  • Langmuir isotherm
  • chemisorption

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Lopes, S. D. C. M., de Souza, L. M., Gadioli, A. O., Neto, C. A. S. C., Vasconcellos, M. D. L. S., Pereira, E. C., Monteiro, S. N., & Azevedo, A. R. (2026). Tetramethylammonium iodide as a corrosion inhibitor for UNS S31803 duplex stainless steel in sulfuric acid environment. Journal of Materials Research and Technology, 45, 7273–7287. https://doi.org/10.1016/j.jmrt.2026.11.011

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.

Who wrote this paper?

Sthefanie de Carvalho Mendes Lopes, Lucas Menezes de Souza, Anderson Oliveira Gadioli, César Augusto Siqueira Crespo Neto, Maria de Lourdes Soprani Vasconcellos, Elaine Cristina Pereira, Sergio N. Monteiro, Afonso R.G. Azevedo.

What is the DOI of this paper?

10.1016/j.jmrt.2026.11.011, permanently at https://doi.org/10.1016/j.jmrt.2026.11.011. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.