Paper · 2001 · Open access
Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering
Published 1 January 2001 · DOI 10.26153/tsw/3346
In brief
“Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering” is a 2001 paper by Lokhande, Mahendra and Richard Crawford. OpenAlex counts 4 citations as of 22 November 2026. It is open access: the full text is free to read at Texas Digital Library (University of Texas).
- Citations
- 4
- Most cited in
- 2018 (1)
- Field-weighted impact
- 0.24
- References
- 2
- Authors
- 2
Abstract
Solid freeform fabrication techniques offer potential as manufacturing technologies in applications that require custom design. One such application is the fabrication of prosthetic sockets. This paper reports on research to manufacture compliant below-the-knee prosthetic sockets using selective laser sintering (SLS). Compliance in the socket is a critical factor in the level of comfort the amputee experiences during gait. The ability to control local geometry is seen as an advantage of SLS in fabricating compliant sockets. This paper presents work on developing a model of compliance for sockets constructed of Duraform®. The approach taken here is to provide the necessary compliance by controlling the wall thickness of the socket. To select the right thickness, a study of the wall deflection with respect to contact pressure was performed. An experimental testing device was designed and constructed to test the deflection versus pressure for different thicknesses of test circular discs made of Duraform®. The results were correlated to a finite element model. These results will be used for designing the compliance in the walls of prosthetic sockets fitted to actual patients.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Mahendra, L., & Crawford, R. (2001). Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering. https://doi.org/10.26153/tsw/3346
MLA 9
Mahendra, Lokhande,, and Richard Crawford. “Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering.” 2001. https://doi.org/10.26153/tsw/3346.
Chicago
Mahendra, Lokhande, and Richard Crawford. 2001. “Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering.” https://doi.org/10.26153/tsw/3346.
Harvard
Mahendra, L. and Crawford, R. (2001) ‘Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering’. doi:10.26153/tsw/3346.
IEEE
L. Mahendra and R. Crawford, “Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering,” 2001, doi: 10.26153/tsw/3346.
BibTeX
@article{mahendra2001testing,
title = {{Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering}},
author = {Mahendra, Lokhande, and Crawford, Richard},
year = {2001},
doi = {10.26153/tsw/3346},
url = {https://doi.org/10.26153/tsw/3346}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics
- prosthetic socket
- selective laser sintering
- compliance
- wall thickness
- finite element analysis
- additive manufacturing
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Mahendra, L., & Crawford, R. (2001). Testing of Compliance in a Prosthetic Socket Fabricated Using Selective Laser Sintering. https://doi.org/10.26153/tsw/3346
How many times has this paper been cited?
4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Texas Digital Library (University of Texas): sign in and open the full text from this page.
Who wrote this paper?
Lokhande, Mahendra, Richard Crawford.
What is the DOI of this paper?
10.26153/tsw/3346, permanently at https://doi.org/10.26153/tsw/3346. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.