Dissertation · 2014 · Open access

Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG

Guilherme Ameloti

Universidade Federal de Uberlândia · Published 24 September 2014 · DOI 10.14393/ufu.di.2014.490

Open PDFView at the publisherCite this paper

In brief

“Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG” is a 2014 dissertation by Guilherme Ameloti, published in Universidade Federal de Uberlândia. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read.

Citations
0
Authors
1

Abstract

In this work the TIG welding process of 304 stainless steel was approached numerically. An inverse problem was solved to estimate the heat transfer rate and the thermal efficiency of the welding process based on experimental temperatures measured by a thermographic camera. It was adopted a numerical model to solve the three-dimensional transient heat diffusion equation with phase change and moving source. The model took into account the dependence of thermal properties on the temperature and also the boundary conditions of heat loss by convection. A two-dimensional constant speed moving heat source along the length was considered and its geometry was defined by the gometrial appearance of the weld bead according to experimental data. The golden section method was used to solve the inverse problem in order to minimize a least square error function defined by the difference between experimental and calculated temperatures. The measurement of the experimental temperature by thermography was assomplished by shooting the opposite face of welding sample. The technique requires prior experimental camera calibration and digital correction of thermographic images. The results were compared with experimental data and values obtained by other authors which confirmed the feasibility of the technique in thermal analysis of welding processes.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ameloti, G. (2014). Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2014.490

MLA 9

Ameloti, Guilherme. “Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG.” Universidade Federal de Uberlândia, 2014. https://doi.org/10.14393/ufu.di.2014.490.

Chicago

Ameloti, Guilherme. 2014. “Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG.” Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2014.490.

Harvard

Ameloti, G. (2014) ‘Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG’, Universidade Federal de Uberlândia. doi:10.14393/ufu.di.2014.490.

IEEE

G. Ameloti, “Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG,” Universidade Federal de Uberlândia, 2014, doi: 10.14393/ufu.di.2014.490.

BibTeX

@phdthesis{ameloti2014termografia,
  title     = {{Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG}},
  author    = {Ameloti, Guilherme},
  year      = {2014},
  doi       = {10.14393/ufu.di.2014.490},
  url       = {https://doi.org/10.14393/ufu.di.2014.490}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • TIG welding
  • infrared thermography
  • inverse heat conduction problem
  • 304 stainless steel
  • transient heat diffusion
  • moving heat source
  • phase transitions
  • temperature-dependent thermal properties

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ameloti, G. (2014). Termografia e problemas inversos aplicados na análise térmica do processo de soldagem TIG. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2014.490

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: sign in and open the PDF from this page.

Who wrote this paper?

Guilherme Ameloti.

What is the DOI of this paper?

10.14393/ufu.di.2014.490, permanently at https://doi.org/10.14393/ufu.di.2014.490. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.