Journal article · 2024 · Open access

Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content

Weijie Yu, Qiuping Mei, Weijiu Huang, Junjun Wang, Yongyao Su

Surface and Interface Analysis, 56(7), 498–511 · Published 4 April 2024 · DOI 10.1002/sia.7308

Open PDFView at the publisherCite this paper

In brief

“Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content” is a 2024 journal article by Weijie Yu and 4 co-authors, published in Surface and Interface Analysis. OpenAlex counts 13 citations as of 17 November 2026, which puts it in the top 7% of works published in 2024 by citations. It is open access: the full text is free to read at Surface and Interface Analysis.

Citations
13
Most cited in
2025 (8)
Field-weighted impact
1.55
References
35
Authors
5

Abstract

The poor high‐temperature tribological performance of diamond‐like carbon (DLC) films severely limits their applications. To address this issue, silicon (Si) doped DLC films with Si content ranging from 0 to 11.52 at.% were synthesized utilizing the plasma‐assisted reactive magnetron sputtering technique. The influence of Si incorporation on the microstructure and mechanical properties was meticulously investigated by Raman spectroscopy, scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS), nanoindentation, and scratch testing. To ascertain the tribological behavior of the Si‐DLC films under elevated temperature conditions, in situ high‐temperature tests were conducted, spanning temperatures from ambient to 500°C. The findings indicated that distinct lubrication mechanisms prevail for Si‐DLC films with varying Si content across different temperature domains. As the test temperature and Si content increased, the lubrication mechanism exhibited a gradual transitions from high‐temperature induced graphitization to a particle wear regime dominated by SiC and formed SiO 2 abrasive phases. The comprehensive performance of the films peaked at a Si content of 4.72 at.%, suggesting an optimal composition for high‐temperature applications. It is postulated that the in‐depth investigation presented herein holds considerable value for the design and fabrication of DLC films intended for use in high‐temperature settings, potentially unlocking their full potential in such demanding environments.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Yu, W., Mei, Q., Huang, W., Wang, J., & Su, Y. (2024). Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content. Surface and Interface Analysis, 56(7), 498–511. https://doi.org/10.1002/sia.7308

MLA 9

Yu, Weijie, et al. “Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content.” Surface and Interface Analysis, vol. 56, no. 7, 2024, pp. 498–511. https://doi.org/10.1002/sia.7308.

Chicago

Yu, Weijie, Qiuping Mei, Weijiu Huang, Junjun Wang, and Yongyao Su. 2024. “Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content.” Surface and Interface Analysis 56 (7): 498–511. https://doi.org/10.1002/sia.7308.

Harvard

Yu, W. et al. (2024) ‘Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content’, Surface and Interface Analysis, 56(7), pp. 498–511. doi:10.1002/sia.7308.

IEEE

W. Yu, Q. Mei, W. Huang, J. Wang, and Y. Su, “Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content,” Surface and Interface Analysis, vol. 56, no. 7, pp. 498–511, 2024, doi: 10.1002/sia.7308.

BibTeX

@article{yu2024tailoring,
  title     = {{Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content}},
  author    = {Yu, Weijie and Mei, Qiuping and Huang, Weijiu and Wang, Junjun and Su, Yongyao},
  journal   = {Surface and Interface Analysis},
  year      = {2024},
  volume    = {56},
  number    = {7},
  pages     = {498--511},
  doi       = {10.1002/sia.7308},
  url       = {https://doi.org/10.1002/sia.7308}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202422
202588
202633

Its field-weighted citation impact is 1.55: it has been cited 1.55 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • silicon-doped diamond-like carbon
  • diamond-like carbon films
  • high-temperature tribology
  • Si content
  • graphitization
  • silicon carbide particles
  • particle wear
  • lubrication mechanism

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Yu, W., Mei, Q., Huang, W., Wang, J., & Su, Y. (2024). Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content. Surface and Interface Analysis, 56(7), 498–511. https://doi.org/10.1002/sia.7308

How many times has this paper been cited?

13 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Surface and Interface Analysis: sign in and open the PDF from this page.

Who wrote this paper?

Weijie Yu, Qiuping Mei, Weijiu Huang, Junjun Wang, Yongyao Su.

What is the DOI of this paper?

10.1002/sia.7308, permanently at https://doi.org/10.1002/sia.7308. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.