Journal article · 2023 · Open access

Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis

Peifeng Li, Nesma T. Aboulkhair, Julan Wu, Kah Leng, Deyu Yang, Adam Thomas Clare, Xianghui Hou, Fang Xu

Journal of Materials Research and Technology, 27, 4891–4907 · Published 19 October 2023 · DOI 10.1016/j.jmrt.2023.10.157

Open full textCite this paper

In brief

“Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis” is a 2023 journal article by Peifeng Li and 7 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 14 citations as of 17 November 2026, which puts it in the top 4% of works published in 2023 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
14
Most cited in
2024 (6)
Field-weighted impact
1.34
References
41
Authors
8

Abstract

Self-lubricating aluminium matrix composites with enhanced tribological properties are sought for weight critical applications. In previous studies, the Al composites incorporating the solid lubricant WS2 have been shown to reduce both the coefficient of friction and wear rate, positioning them as promising candidates in various tribological applications (e.g. automotive industry). However, the impact of interfacial reactions between Al and WS2 during composite production on tribological performance has still not yet been explored. This study highlights the hardening effect of the reaction products. Despite some literature assuming a negative impact of these reactions as they consume WS2 in the composites, this study presents evidence that this cannot be generalised for the overall outcome. Interestingly, a controlled amount is shown to be beneficial for tribological properties. In this work, the tribological influence of the Al-W intermetallic structure forming during spark plasma sintering of the Al-WS2 composites was investigated. The microstructure was tailored by adjusting the manufacturing temperature between 500 and 600 °C. The Al-WS2 fabricated at 580 °C exhibited the lowest coefficient of friction and specific wear rate (reduced by 20% and 97%, respectively, compared to the one fabricated at 500 °C. Furthermore, the worn surface morphology in different stages during friction was evaluated by a novel wear track evolution analysis. This study confirmed that offering a balance between the fraction of solid lubricants and in-situ formed hard intermetallic structure is crucial to the effective formation a protective layer on the worn surface.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Li, P., Aboulkhair, N. T., Wu, J., Leng, K., Yang, D., Clare, A. T., Hou, X., & Xu, F. (2023). Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis. Journal of Materials Research and Technology, 27, 4891–4907. https://doi.org/10.1016/j.jmrt.2023.10.157

MLA 9

Li, Peifeng, et al. “Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis.” Journal of Materials Research and Technology, vol. 27, 2023, pp. 4891–4907. https://doi.org/10.1016/j.jmrt.2023.10.157.

Chicago

Li, Peifeng, Nesma T. Aboulkhair, Julan Wu, Kah Leng, Deyu Yang, Adam Thomas Clare, Xianghui Hou, and Fang Xu. 2023. “Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis.” Journal of Materials Research and Technology 27: 4891–4907. https://doi.org/10.1016/j.jmrt.2023.10.157.

Harvard

Li, P. et al. (2023) ‘Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis’, Journal of Materials Research and Technology, 27, pp. 4891–4907. doi:10.1016/j.jmrt.2023.10.157.

IEEE

P. Li et al., “Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis,” Journal of Materials Research and Technology, vol. 27, pp. 4891–4907, 2023, doi: 10.1016/j.jmrt.2023.10.157.

BibTeX

@article{li2023tailoring,
  title     = {{Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis}},
  author    = {Li, Peifeng and Aboulkhair, Nesma T. and Wu, Julan and Leng, Kah and Yang, Deyu and Clare, Adam Thomas and Hou, Xianghui and Xu, Fang},
  journal   = {Journal of Materials Research and Technology},
  year      = {2023},
  volume    = {27},
  pages     = {4891--4907},
  doi       = {10.1016/j.jmrt.2023.10.157},
  url       = {https://doi.org/10.1016/j.jmrt.2023.10.157}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202466
202555
202633

Its field-weighted citation impact is 1.34: it has been cited 1.34 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Aluminum Alloys Composites Properties

  • self-lubricating composites
  • aluminum matrix composites
  • tungsten disulfide
  • solid lubricants
  • interfacial reaction
  • spark plasma sintering
  • sintering temperature
  • friction coefficient

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Li, P., Aboulkhair, N. T., Wu, J., Leng, K., Yang, D., Clare, A. T., Hou, X., & Xu, F. (2023). Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al–WS2 composite for enhanced tribological performance with wear track evolution analysis. Journal of Materials Research and Technology, 27, 4891–4907. https://doi.org/10.1016/j.jmrt.2023.10.157

How many times has this paper been cited?

14 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.

Who wrote this paper?

Peifeng Li, Nesma T. Aboulkhair, Julan Wu, Kah Leng, Deyu Yang, Adam Thomas Clare, Xianghui Hou, Fang Xu.

What is the DOI of this paper?

10.1016/j.jmrt.2023.10.157, permanently at https://doi.org/10.1016/j.jmrt.2023.10.157. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.