Journal article · 2021 · Open access

Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand

Jasper Wollaston James, Alex Church, Luke Cramphorn, Nathan F. Lepora

Soft Robotics, 8(5), 594–610 · Published 1 October 2021 · DOI 10.1089/soro.2020.0019

Open full textCite this paper

In brief

“Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand” is a 2021 journal article by Jasper Wollaston James and 3 co-authors, published in Soft Robotics. OpenAlex counts 59 citations as of 22 November 2026, which puts it in the top 3% of works published in 2021 by citations. It is open access under a CC BY licence: the full text is free to read at Soft Robotics.

Citations
59
Most cited in
2023 (15)
Field-weighted impact
3.71
References
54
Authors
4

Abstract

Bringing tactile sensation to robotic hands will allow for more effective grasping, along with a wide range of benefits of human-like touch. Here, we present a three-dimensional-printed, three-fingered tactile robot hand comprising an OpenHand ModelO customized to house a TacTip soft biomimetic tactile sensor in the distal phalanx of each finger. We expect that combining the grasping capabilities of this underactuated hand with sophisticated tactile sensing will result in an effective platform for robot hand research-the Tactile Model O (T-MO). The design uses three JeVois machine vision systems, with each comprising a miniature camera in the tactile fingertip with a processing module in the base of the hand. To evaluate the capabilities of the T-MO, we benchmark its grasping performance by using the Gripper Assessment Benchmark on the Yale-CMU-Berkeley object set. Tactile sensing capabilities are evaluated by performing tactile object classification on 26 objects and predicting whether a grasp will successfully lift each object. Results are consistent with the state of the art, taking advantage of advances in deep learning applied to tactile image outputs. Overall, this work demonstrates that the T-MO is an effective platform for robot hand research and we expect it to open up a range of applications in autonomous object handling.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

James, J. W., Church, A., Cramphorn, L., & Lepora, N. F. (2021). Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand. Soft Robotics, 8(5), 594–610. https://doi.org/10.1089/soro.2020.0019

MLA 9

James, Jasper Wollaston, et al. “Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand.” Soft Robotics, vol. 8, no. 5, 2021, pp. 594–610. https://doi.org/10.1089/soro.2020.0019.

Chicago

James, Jasper Wollaston, Alex Church, Luke Cramphorn, and Nathan F. Lepora. 2021. “Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand.” Soft Robotics 8 (5): 594–610. https://doi.org/10.1089/soro.2020.0019.

Harvard

James, J. W. et al. (2021) ‘Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand’, Soft Robotics, 8(5), pp. 594–610. doi:10.1089/soro.2020.0019.

IEEE

J. W. James, A. Church, L. Cramphorn, and N. F. Lepora, “Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand,” Soft Robotics, vol. 8, no. 5, pp. 594–610, 2021, doi: 10.1089/soro.2020.0019.

BibTeX

@article{james2021tactile,
  title     = {{Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand}},
  author    = {James, Jasper Wollaston and Church, Alex and Cramphorn, Luke and Lepora, Nathan F.},
  journal   = {Soft Robotics},
  year      = {2021},
  volume    = {8},
  number    = {5},
  pages     = {594--610},
  doi       = {10.1089/soro.2020.0019},
  url       = {https://doi.org/10.1089/soro.2020.0019}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202055
20211111
202277
20231515
202499
202577
202655

Its field-weighted citation impact is 3.71: it has been cited 3.71 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Robot Manipulation and Learning

  • three-fingered hand
  • underactuated hand

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

James, J. W., Church, A., Cramphorn, L., & Lepora, N. F. (2021). Tactile Model O: Fabrication and Testing of a 3D-Printed, Three-Fingered Tactile Robot Hand. Soft Robotics, 8(5), 594–610. https://doi.org/10.1089/soro.2020.0019

How many times has this paper been cited?

59 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Soft Robotics: sign in and open the full text from this page.

Who wrote this paper?

Jasper Wollaston James, Alex Church, Luke Cramphorn, Nathan F. Lepora.

What is the DOI of this paper?

10.1089/soro.2020.0019, permanently at https://doi.org/10.1089/soro.2020.0019. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.