Conference paper · 2014 · Open access

Tactile feedback in upper limb prosthetic devices using flexible textile force sensors

Luke E. Osborn, Wang Wei Lee, Rahul R. Kaliki, Nitish V. Thakor

IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 2014, 114–119 · Published 1 August 2014 · DOI 10.1109/biorob.2014.6913762

Open full textView at the publisherCite this paper

In brief

“Tactile feedback in upper limb prosthetic devices using flexible textile force sensors” is a 2014 conference paper by Luke E. Osborn and 3 co-authors, published in IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). OpenAlex counts 46 citations as of 22 November 2026. It is open access: the full text is free to read at PubMed Central.

Citations
46
Most cited in
2019 (9)
Field-weighted impact
3.50
References
18
Authors
4

Abstract

Many upper limb amputees are faced with the difficult challenge of using a prosthesis that lacks tactile sensing. State of the art research caliber prosthetic hands are often equipped with sophisticated sensors that provide valuable information regarding the prosthesis and its surrounding environment. Unfortunately, most commercial prosthetic hands do not contain any tactile sensing capabilities. In this paper, a textile based tactile sensor system was designed, built, and evaluated for use with upper limb prosthetic devices. Despite its simplicity, we demonstrate the ability of the sensors to determine object contact and perturbations due to slip during a grasping task with a prosthetic hand. This suggests the use of low-cost, customizable, textile sensors as part of a closed-loop tactile feedback system for monitoring grasping forces specifically in an upper limb prosthetic device.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Osborn, L. E., Lee, W. W., Kaliki, R. R., & Thakor, N. V. (2014). Tactile feedback in upper limb prosthetic devices using flexible textile force sensors. IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 2014, 114–119. https://doi.org/10.1109/biorob.2014.6913762

MLA 9

Osborn, Luke E., et al. “Tactile feedback in upper limb prosthetic devices using flexible textile force sensors.” IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), vol. 2014, 2014, pp. 114–119. https://doi.org/10.1109/biorob.2014.6913762.

Chicago

Osborn, Luke E., Wang Wei Lee, Rahul R. Kaliki, and Nitish V. Thakor. 2014. “Tactile feedback in upper limb prosthetic devices using flexible textile force sensors.” IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob) 2014: 114–119. https://doi.org/10.1109/biorob.2014.6913762.

Harvard

Osborn, L. E. et al. (2014) ‘Tactile feedback in upper limb prosthetic devices using flexible textile force sensors’, IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 2014, pp. 114–119. doi:10.1109/biorob.2014.6913762.

IEEE

L. E. Osborn, W. W. Lee, R. R. Kaliki, and N. V. Thakor, “Tactile feedback in upper limb prosthetic devices using flexible textile force sensors,” IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), vol. 2014, pp. 114–119, 2014, doi: 10.1109/biorob.2014.6913762.

BibTeX

@inproceedings{osborn2014tactile,
  title     = {{Tactile feedback in upper limb prosthetic devices using flexible textile force sensors}},
  author    = {Osborn, Luke E. and Lee, Wang Wei and Kaliki, Rahul R. and Thakor, Nitish V.},
  booktitle = {IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob)},
  year      = {2014},
  volume    = {2014},
  pages     = {114--119},
  doi       = {10.1109/biorob.2014.6913762},
  url       = {https://doi.org/10.1109/biorob.2014.6913762}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201633
201744
201844
201999
202022
202166
202222
202388
202411
202666

Its field-weighted citation impact is 3.50: it has been cited 3.50 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics

  • tactile feedback
  • upper limb prosthesis
  • prosthetic hand
  • flexible sensors
  • slip detection
  • feedback control
  • amputees
  • low-cost sensors

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Osborn, L. E., Lee, W. W., Kaliki, R. R., & Thakor, N. V. (2014). Tactile feedback in upper limb prosthetic devices using flexible textile force sensors. IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 2014, 114–119. https://doi.org/10.1109/biorob.2014.6913762

How many times has this paper been cited?

46 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at PubMed Central: sign in and open the full text from this page.

Who wrote this paper?

Luke E. Osborn, Wang Wei Lee, Rahul R. Kaliki, Nitish V. Thakor.

What is the DOI of this paper?

10.1109/biorob.2014.6913762, permanently at https://doi.org/10.1109/biorob.2014.6913762. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.