Paper · 2013 · Open access
Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering
UTA ResearchCommons (University of Texas Arlington) · Published 22 July 2013
In brief
“Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering” is a 2013 paper by M. Venkatesh, published in UTA ResearchCommons (University of Texas Arlington). OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at UTA ResearchCommons (University of Texas Arlington).
- Citations
- 0
- References
- 63
- Authors
- 1
Abstract
Diamond-like carbon thin films are been used in wide range of applications due to their attractive tribological properties. Metal-doped DLC films have significant properties which make them compatible to use in larger variety of applications. The present study examines the dispersion and their effect on various tribological properties when Ag is incorporated into the DLC thin films. These Ag-DLC nanocomposite films were synthesized by a hybrid CVD and magnetron sputtering process in a discharge composed of CH4, and Ar atmosphere. These DLC and Ag-DLC films were characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. Tribological tests were carried out to measure the frictional and wear behavior of the Ag-DLC films as a function of Ag content. The TEM cross sectional studies revealed that Ag is present as Ag nanoparticles that were distributed uniformly throughout an amorphous DLC matrix. XPS analysis confirmed that Ag in the nanoparticles was present in the metallic form. Increasing the Ag content in the film, reduced its sp3 content. The incorporation of these nanoparticles causes a reduction in hardness in Ag-DLC when compared with pure DLC films. Microhardness of DLC films exhibits values up to a maximum of 16 GPa and gradually decreases with increasing in Ag content. FTIR and Raman studies confirmed that the films contain a significant amount of hydrogen, and with an increase in the Ag content in the DLC film results in an increase in sp2 carbon content. Finally, the friction behavior of the Ag-DLC films showed a comparable performance with that of DLC films with a coefficient of friction as low as 0.1. The DLC films exhibited a lower wear rate of 5.51x10-8 mm3/Nm than Ag-DLC films. The wear rate in the Ag-DLC films gradually increased with increasing Ag content but it remained at low levels (i.e., up to 1.7x10-7 mm3/Nm). This is consistent with the higher sp2 content of the Ag-DLC films.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Venkatesh, M. (2013). Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering. UTA ResearchCommons (University of Texas Arlington). http://hdl.handle.net/10106/11806
MLA 9
Venkatesh, M. “Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering.” UTA ResearchCommons (University of Texas Arlington), 2013. http://hdl.handle.net/10106/11806.
Chicago
Venkatesh, M. 2013. “Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering.” UTA ResearchCommons (University of Texas Arlington). http://hdl.handle.net/10106/11806.
Harvard
Venkatesh, M. (2013) ‘Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering’, UTA ResearchCommons (University of Texas Arlington). Available at: http://hdl.handle.net/10106/11806.
IEEE
M. Venkatesh, “Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering,” UTA ResearchCommons (University of Texas Arlington), 2013.
BibTeX
@article{venkatesh2013synthesis,
title = {{Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering}},
author = {Venkatesh, M.},
journal = {UTA ResearchCommons (University of Texas Arlington)},
year = {2013},
url = {http://hdl.handle.net/10106/11806}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon
- silver nanoparticles
- nanocomposite films
- tribological properties
- friction
- wear rate
- microhardness
- hydrogen content
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Venkatesh, M. (2013). Synthesis Of Silver-diamond Like Carbon Thin Films By Magnetron Sputtering. UTA ResearchCommons (University of Texas Arlington). http://hdl.handle.net/10106/11806
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at UTA ResearchCommons (University of Texas Arlington): sign in and open the full text from this page.
Who wrote this paper?
M. Venkatesh.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.