Journal article · 2023 · Open access

Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties

Mustafa Akın, Mehmet Can DURMUŞ, Imren Meydan, Emel ATILAL

International Journal of Automotive Science And Technology, 7(1), 70–77 · Published 31 March 2023 · DOI 10.30939/ijastech..1194177

Open PDFView at the publisherCite this paper

In brief

“Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties” is a 2023 journal article by Mustafa Akın and 3 co-authors, published in International Journal of Automotive Science And Technology. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at International Journal of Automotive Science And Technology.

Citations
0
References
23
Authors
4

Abstract

The purpose of this work is synthesis and characterization of pryridin-yl-borate esters and investigation of tribological performance as additive. The syn-thesis of dialkyl-(2-(pyridin-2-yl) ethyl) borate esters both in the literature and the novel synthesis of dialkyl 2-(methyl (pyridin-2-yl) borate esters and dialkyl 2- (5-ethylpyridin-2-yl) ethyl borate esters were carried out. The boron esters to be obtained were characterized by using IR, 1H NMR,13C NMR spectroscopic methods as well as physical methods such as TAN and corrosion tests. The fric-tion-reducing and anti-wear properties of the synthesized lubricant additives were measured with a four-ball friction and wear tester. As a result of these stud-ies, it has been shown that the friction coefficient is reduced by about 30-40 % compared to the base oil and the wear is also reduced. In the tribological analysis performed using synthesized four molecules within the scope of the study, it was found that resistance to oxidation is increased when the synthesized molecules were added to group I base oil at 0.5 % and 1% w/w concentration. The novel synthesis of dialkyl 2-(methyl (pyridin-2-yl) borate esters and dialkyl 2- (5-ethylpyridin-2-yl) ethyl borate esters were carried out and tribological perfor-mances in base oil were analysed first time.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Akın, M., DURMUŞ, M. C., Meydan, I., & ATILAL, E. (2023). Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties. International Journal of Automotive Science And Technology, 7(1), 70–77. https://doi.org/10.30939/ijastech..1194177

MLA 9

Akın, Mustafa, et al. “Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties.” International Journal of Automotive Science And Technology, vol. 7, no. 1, 2023, pp. 70–77. https://doi.org/10.30939/ijastech..1194177.

Chicago

Akın, Mustafa, Mehmet Can DURMUŞ, Imren Meydan, and Emel ATILAL. 2023. “Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties.” International Journal of Automotive Science And Technology 7 (1): 70–77. https://doi.org/10.30939/ijastech..1194177.

Harvard

Akın, M. et al. (2023) ‘Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties’, International Journal of Automotive Science And Technology, 7(1), pp. 70–77. doi:10.30939/ijastech..1194177.

IEEE

M. Akın, M. C. DURMUŞ, I. Meydan, and E. ATILAL, “Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties,” International Journal of Automotive Science And Technology, vol. 7, no. 1, pp. 70–77, 2023, doi: 10.30939/ijastech..1194177.

BibTeX

@article{akn2023synthesis,
  title     = {{Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties}},
  author    = {Akın, Mustafa and DURMUŞ, Mehmet Can and Meydan, Imren and ATILAL, Emel},
  journal   = {International Journal of Automotive Science And Technology},
  year      = {2023},
  volume    = {7},
  number    = {1},
  pages     = {70--77},
  doi       = {10.30939/ijastech..1194177},
  url       = {https://doi.org/10.30939/ijastech..1194177}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives

  • boronic esters
  • lubricant additives
  • anti-wear properties
  • extreme pressure properties
  • friction reduction
  • wear reduction
  • oxidation resistance
  • tribological properties

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Akın, M., DURMUŞ, M. C., Meydan, I., & ATILAL, E. (2023). Synthesis of Oil Soluble Boron Esters and Obtaining Lubricant Additive Packages with Anti-wear and Extreme Pressure Properties. International Journal of Automotive Science And Technology, 7(1), 70–77. https://doi.org/10.30939/ijastech..1194177

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at International Journal of Automotive Science And Technology: sign in and open the PDF from this page.

Who wrote this paper?

Mustafa Akın, Mehmet Can DURMUŞ, Imren Meydan, Emel ATILAL.

What is the DOI of this paper?

10.30939/ijastech..1194177, permanently at https://doi.org/10.30939/ijastech..1194177. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.