Conference paper · 2020 · Open access
Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide
IOP Conference Series Materials Science and Engineering, 763(1), 012040 · Published 1 February 2020 · DOI 10.1088/1757-899x/763/1/012040
In brief
“Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide” is a 2020 conference paper by Adji Kawigraha and 2 co-authors, published in IOP Conference Series Materials Science and Engineering. OpenAlex counts 3 citations as of 18 November 2026. It is open access under a CC BY licence: the full text is free to read at IOP Conference Series Materials Science and Engineering.
- Citations
- 3
- Most cited in
- 2022 (2)
- Field-weighted impact
- 1.76
- References
- 10
- Authors
- 3
Abstract
Mesoporous carbon has been synthesized using soft-template method with phloroglucinol as carbon precursor and pluronic F127 as a template to form mesosize pores in carbon structure. The Brunauer-Emmett-Teller (BET) results prove the existence of hysteresis loop and adsorption isotherm type IV with total surface area of 432.498 m2/g and pore diameter of 7.46 nm. The mesoporous carbon was then impregnated with various amount of nickel metal using Ni(NO3)2 as precursor, followed by four ways of reduction: (1) with ethylene glycol in aqueous solution; (2) with ethylene glycol in 98 % ethanol in water; (3) with NaBH4; and (4) with H2 gas. Energy Dispersive X-Ray (EDX) analysis shows that nickel content in materials after reduction were (1) 34.48 %, (2) 0.02 %, (3) 0.9 % and (4) 1.73 %, in respective to the reduction methods. X-Ray Diffraction (XRD) patterns of mesoporous carbon reduced with NaBH4 and H2 show no change in mesoporous carbon structure, especially for peak at 2θ of 24.44° and 43.18°. After impregnation, the materials were further tested for their catalytic activity for acetylene reactions with CO2. The reactions were conducted in a 100 mL batch reactor with a pressure ratio of acetylene to CO2 of 0.2:0.8. Some reaction conditions were examined to determine the effect on the reaction: reaction time (3, 6, 12) h and reaction temperature (25, 40 and 80) °C. Product analysis using High Performance Liquid Chromatography (HPLC) shows that new peak appears at retention time of 3.625 minutes. The optimum condition was obtained at 25 °C and 3 hours.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kawigraha, A., Krisnandi, Y. K., & Abdullah, I. (2020). Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide. IOP Conference Series Materials Science and Engineering, 763(1), 012040. https://doi.org/10.1088/1757-899x/763/1/012040
MLA 9
Kawigraha, Adji, et al. “Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide.” IOP Conference Series Materials Science and Engineering, vol. 763, no. 1, 2020, p. 012040. https://doi.org/10.1088/1757-899x/763/1/012040.
Chicago
Kawigraha, Adji, Yuni Krisyuningsih Krisnandi, and Iman Abdullah. 2020. “Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide.” IOP Conference Series Materials Science and Engineering 763 (1): 012040. https://doi.org/10.1088/1757-899x/763/1/012040.
Harvard
Kawigraha, A., Krisnandi, Y. K. and Abdullah, I. (2020) ‘Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide’, IOP Conference Series Materials Science and Engineering, 763(1), p. 012040. doi:10.1088/1757-899x/763/1/012040.
IEEE
A. Kawigraha, Y. K. Krisnandi, and I. Abdullah, “Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide,” IOP Conference Series Materials Science and Engineering, vol. 763, no. 1, p. 012040, 2020, doi: 10.1088/1757-899x/763/1/012040.
BibTeX
@inproceedings{kawigraha2020synthesis,
title = {{Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide}},
author = {Kawigraha, Adji and Krisnandi, Yuni Krisyuningsih and Abdullah, Iman},
booktitle = {IOP Conference Series Materials Science and Engineering},
year = {2020},
volume = {763},
number = {1},
pages = {012040},
doi = {10.1088/1757-899x/763/1/012040},
url = {https://doi.org/10.1088/1757-899x/763/1/012040}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- nickel catalysts
- mesoporous carbon
- acetylene
- carbon dioxide
- phloroglucinol
- Pluronic F127
- soft templating
- nickel impregnation
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Kawigraha, A., Krisnandi, Y. K., & Abdullah, I. (2020). Synthesis of impregnated nickel-mesoporous carbon and its application for reaction of acetylene with carbon dioxide. IOP Conference Series Materials Science and Engineering, 763(1), 012040. https://doi.org/10.1088/1757-899x/763/1/012040
How many times has this paper been cited?
3 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at IOP Conference Series Materials Science and Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Adji Kawigraha, Yuni Krisyuningsih Krisnandi, Iman Abdullah.
What is the DOI of this paper?
10.1088/1757-899x/763/1/012040, permanently at https://doi.org/10.1088/1757-899x/763/1/012040. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.