Journal article · 2013 · Open access

Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst

Sang‐Won Lee, Karina Mees, Ho Seon Park, Monika A. Willert-Porada, Chang Seop Lee

Advanced materials research, 750-752, 280–292 · Published 30 August 2013 · DOI 10.4028/www.scientific.net/amr.750-752.280

Read the free full textCite this paper

In brief

“Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst” is a 2013 journal article by Sang‐Won Lee and 4 co-authors, published in Advanced materials research. OpenAlex counts 6 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.

Citations
6
Most cited in
2016 (2)
Field-weighted impact
0.53
References
15
Authors
5

Abstract

This research was conducted to synthesize carbon nanofibers on C-fiber textiles by thermal CVD using Fe catalyst. The substrate which was a carbon textile consisting of non woven carbon fibers and attached graphite particles, was oxidized by nitric acid before the deposition process. Hydroxyl groups were created on the C-fiber textile due to the oxidization step. Fe (III) hydroxide was subsequently deposited on the oxidized surface of the C-fiber textile. To deposit ferric particles two different methods were tested: i) deposition-precipitation, ii) dip-coating. For the experiments using both type of catalyst deposition the weight ratio of Fe to C-fiber textile was also varied. Ferric particles were reduced to iron after deposition by using H 2 /N 2 gas and CNFs were grown by flowing ethylene gas. Properties of carbon nanofibers created like this were analyzed through Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), N 2 -sorption (BET), X-Ray Diffraction (XRD), and X-ray Photoelectron Spectoscopy (XPS). In the case of deposition-precipitation method the result shows that the diameter of carbon nanofibers grew up to 40~60nm and 30~55nm at which the weight ratios of Fe catalyst to C-fiber textiles are 1:30 and 1:70 respectively. If Fe particles were deposited by dip-coating method, the diameter of carbon nanofibers grew up to 40~60nm and 25~30nm for the ratios of Fe catalyst to C-fiber textiles 1:10 and 1:30.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lee, S., Mees, K., Park, H. S., Willert-Porada, M. A., & Lee, C. S. (2013). Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst. Advanced materials research, 750-752, 280–292. https://doi.org/10.4028/www.scientific.net/amr.750-752.280

MLA 9

Lee, Sang‐Won, et al. “Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst.” Advanced materials research, vol. 750-752, 2013, pp. 280–292. https://doi.org/10.4028/www.scientific.net/amr.750-752.280.

Chicago

Lee, Sang‐Won, Karina Mees, Ho Seon Park, Monika A. Willert-Porada, and Chang Seop Lee. 2013. “Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst.” Advanced materials research 750-752: 280–292. https://doi.org/10.4028/www.scientific.net/amr.750-752.280.

Harvard

Lee, S. et al. (2013) ‘Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst’, Advanced materials research, 750-752, pp. 280–292. doi:10.4028/www.scientific.net/amr.750-752.280.

IEEE

S. Lee, K. Mees, H. S. Park, M. A. Willert-Porada, and C. S. Lee, “Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst,” Advanced materials research, vol. 750-752, pp. 280–292, 2013, doi: 10.4028/www.scientific.net/amr.750-752.280.

BibTeX

@article{lee2013synthesis,
  title     = {{Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst}},
  author    = {Lee, Sang‐Won and Mees, Karina and Park, Ho Seon and Willert-Porada, Monika A. and Lee, Chang Seop},
  journal   = {Advanced materials research},
  year      = {2013},
  volume    = {750-752},
  pages     = {280--292},
  doi       = {10.4028/www.scientific.net/amr.750-752.280},
  url       = {https://doi.org/10.4028/www.scientific.net/amr.750-752.280}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201411
201511
201622
201922

Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites

  • carbon nanofibers
  • carbon fiber textiles
  • thermal chemical vapor deposition
  • iron catalysts
  • ferric hydroxide
  • nitric acid oxidation
  • hydroxyl groups
  • catalyst deposition

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Lee, S., Mees, K., Park, H. S., Willert-Porada, M. A., & Lee, C. S. (2013). Synthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe Catalyst. Advanced materials research, 750-752, 280–292. https://doi.org/10.4028/www.scientific.net/amr.750-752.280

How many times has this paper been cited?

6 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Advanced materials research.

Who wrote this paper?

Sang‐Won Lee, Karina Mees, Ho Seon Park, Monika A. Willert-Porada, Chang Seop Lee.

What is the DOI of this paper?

10.4028/www.scientific.net/amr.750-752.280. The permanent link is https://doi.org/10.4028/www.scientific.net/amr.750-752.280.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.