Journal article · 2025 · Open access

Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation

Mostafa Farrag

Scientific Reports, 15(1), 42014 · Published 25 November 2025 · DOI 10.1038/s41598-025-27518-4

Open PDFView at the publisherCite this paper

In brief

“Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation” is a 2025 journal article by Mostafa Farrag, published in Scientific Reports. OpenAlex counts 9 citations as of 18 November 2026, which puts it in the top 2% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Scientific Reports.

Citations
9
Most cited in
2026 (9)
Field-weighted impact
1.60
References
57
Authors
1

Abstract

Cobalt-, nickel-, copper-, and zirconium-cluster-based metal-organic frameworks (MOFs) were synthesized via the solvothermal method using 1,4-naphthalenedicarboxylic acid (1,4-NDC) as the organic linker. The synthesized MOFs were characterized by PXRD, XPS, TEM, and the BET model. Powder X-ray diffraction (PXRD) confirmed that the MOFs possessed highly crystalline structures. These MOFs were utilized as innovative catalysts to produce hydrogen through the hydrolysis of sodium borohydride (NaBH₄), a promising hydrogen source for energy applications. Among them, Co(1,4-NDC) and Ni(1,4-NDC) catalysts exhibited the highest catalytic activity, producing the maximum hydrogen volume within 5.1 and 6.0 min of stirring at room temperature, respectively. The high catalytic activity is attributed to the small particle sizes of the cobalt and nickel clusters in the MOFs, as confirmed by TEM analysis, and to their large surface areas, with Co(1,4-NDC) and Ni(1,4-NDC) exhibiting specific surface areas of 820 and 770 m²/g, respectively. The effects of catalyst weight and reaction temperature (30-60 °C) were investigated. Co(1,4-NDC) and Ni(1,4-NDC) showed high hydrogen generation rates (HGR) of 1777 and 1333 mL H₂ g⁻¹ min⁻¹ at 60 °C, respectively. The apparent activation energy of NaBH₄ hydrolysis over Ni(1,4-NDC) was 33.94 kJ/mol, which is lower than that of many MOFs with different linkers reported in the literature. The presence of a base (NaOH) increased the hydrogen generation rate and reduced the activation energy in the case of Co(1,4-NDC), used here as a model catalyst. The HGR reached 1785.7 mL H₂ g⁻¹ min⁻¹ at room temperature and 6250 mL H₂ g⁻¹ min⁻¹ at 60 °C in the presence of 15 mg NaOH. The activation energy for NaBH₄ hydrolysis over Co(1,4-NDC) decreased from 40.53 to 34.14 kJ/mol in the presence of the base. Moreover, Co(1,4-NDC) demonstrated high recyclability for at least seven cycles, both with and without the base. These synthesized catalysts are considered highly efficient, noble-metal-free catalysts for energy-related applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Farrag, M. (2025). Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation. Scientific Reports, 15(1), 42014. https://doi.org/10.1038/s41598-025-27518-4

MLA 9

Farrag, Mostafa. “Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation.” Scientific Reports, vol. 15, no. 1, 2025, p. 42014. https://doi.org/10.1038/s41598-025-27518-4.

Chicago

Farrag, Mostafa. 2025. “Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation.” Scientific Reports 15 (1): 42014. https://doi.org/10.1038/s41598-025-27518-4.

Harvard

Farrag, M. (2025) ‘Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation’, Scientific Reports, 15(1), p. 42014. doi:10.1038/s41598-025-27518-4.

IEEE

M. Farrag, “Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation,” Scientific Reports, vol. 15, no. 1, p. 42014, 2025, doi: 10.1038/s41598-025-27518-4.

BibTeX

@article{farrag2025synthesis,
  title     = {{Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation}},
  author    = {Farrag, Mostafa},
  journal   = {Scientific Reports},
  year      = {2025},
  volume    = {15},
  number    = {1},
  pages     = {42014},
  doi       = {10.1038/s41598-025-27518-4},
  url       = {https://doi.org/10.1038/s41598-025-27518-4}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Hydrogen Storage and Materials

  • metal-organic frameworks
  • 1,4-naphthalenedicarboxylic acid
  • cobalt MOF
  • nickel MOF
  • zirconium MOF
  • copper MOF
  • hydrogen production
  • sodium borohydride hydrolysis

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Farrag, M. (2025). Synthesis and characterization of Co, Ni, Zr and Cu MOFs based on 1,4-naphthalenedicarboxylic acid linker for hydrogen generation. Scientific Reports, 15(1), 42014. https://doi.org/10.1038/s41598-025-27518-4

How many times has this paper been cited?

9 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Scientific Reports: sign in and open the PDF from this page.

Who wrote this paper?

Mostafa Farrag.

What is the DOI of this paper?

10.1038/s41598-025-27518-4, permanently at https://doi.org/10.1038/s41598-025-27518-4. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.