Journal article · 2025 · Open access
Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries
Tungsten, 8(2), 314–337 · Published 23 December 2025 · DOI 10.1007/s42864-025-00366-5
In brief
“Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries” is a 2025 journal article by Amirhossein Mirtaleb and Ruigang Wang, published in Tungsten. OpenAlex counts 6 citations as of 18 November 2026, which puts it in the top 3% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Tungsten.
- Citations
- 6
- Most cited in
- 2026 (6)
- Field-weighted impact
- 0.98
- References
- 86
- Authors
- 2
Abstract
The widespread commercialization of lithium–sulfur (Li–S) batteries is severely impeded by rapid capacity fading, polysulfide shuttling, and sluggish redox kinetics, particularly under the high sulfur loading and lean electrolyte conditions required for practical applications. This work reports a multifunctional separator that addresses these critical challenges by leveraging a CeSe2@TiSe2–C heterostructure (synthesized via an MXene-templated strategy) as a coating layer. The CeSe2 component supplies abundant redox-active sites, enabling reversible polysulfide anchoring and catalytic conversion, while the TiSe2–C scaffold provides high electronic conductivity and robust mechanical support. This dual-function interlayer achieves effective polysulfide regulation and accelerates sulfur redox kinetics, as demonstrated by suppressed shuttle effect, reduced interfacial resistance, and enhanced lithium-ion transport. Li–S cells equipped with the CeSe2@TiSe2–C coated separator deliver outstanding electrochemical performance across both fundamental and application-relevant regimes. At a low sulfur loading of 1 mg⋅cm⁻2, the system exhibits an initial discharge capacity of 1650 mAh·g⁻1 at 0.2C. Under practical conditions, i.e., high sulfur loading (5 mg⋅cm⁻2) and lean electrolyte (E/S = 6.5 μL⋅mg⁻1), the cell achieves an initial capacity of 964 mAh⋅g⁻1 at 0.2C, retaining 729 mAh⋅g⁻1 after 100 cycles (75.6% retention) and maintaining a high average Coulombic efficiency of 97.9%. The charge-transfer resistance remains low (27.4 Ω), and comparative studies reveal superior suppression of polysulfide migration, enhanced redox kinetics, and significantly reduced capacity decay relative to TiSe2–C, CeSe2, or uncoated separators. These results establish a scalable and versatile separator design paradigm for Li–S batteries, integrating redox catalysis with conductive frameworks, and provide critical insights for the development of high-energy-density, long-life batteries for next-generation energy storage and electric mobility.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Mirtaleb, A., & Wang, R. (2025). Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries. Tungsten, 8(2), 314–337. https://doi.org/10.1007/s42864-025-00366-5
MLA 9
Mirtaleb, Amirhossein, and Ruigang Wang. “Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries.” Tungsten, vol. 8, no. 2, 2025, pp. 314–337. https://doi.org/10.1007/s42864-025-00366-5.
Chicago
Mirtaleb, Amirhossein and Ruigang Wang. 2025. “Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries.” Tungsten 8 (2): 314–337. https://doi.org/10.1007/s42864-025-00366-5.
Harvard
Mirtaleb, A. and Wang, R. (2025) ‘Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries’, Tungsten, 8(2), pp. 314–337. doi:10.1007/s42864-025-00366-5.
IEEE
A. Mirtaleb and R. Wang, “Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries,” Tungsten, vol. 8, no. 2, pp. 314–337, 2025, doi: 10.1007/s42864-025-00366-5.
BibTeX
@article{mirtaleb2025synergistic,
title = {{Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries}},
author = {Mirtaleb, Amirhossein and Wang, Ruigang},
journal = {Tungsten},
year = {2025},
volume = {8},
number = {2},
pages = {314--337},
doi = {10.1007/s42864-025-00366-5},
url = {https://doi.org/10.1007/s42864-025-00366-5}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- lithium-sulfur batteries
- polysulfide shuttle suppression
- separator coating
- redox catalysis
- polysulfide anchoring
- high sulfur loading
- lean electrolyte
- sulfur redox kinetics
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Mirtaleb, A., & Wang, R. (2025). Synergistic polysulfide regulation and redox catalysis via CeSe2@TiSe2-C separator for practical high-loading lithium-sulfur batteries. Tungsten, 8(2), 314–337. https://doi.org/10.1007/s42864-025-00366-5
How many times has this paper been cited?
6 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Tungsten: sign in and open the PDF from this page.
Who wrote this paper?
Amirhossein Mirtaleb, Ruigang Wang.
What is the DOI of this paper?
10.1007/s42864-025-00366-5, permanently at https://doi.org/10.1007/s42864-025-00366-5. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.