Journal article · 2026 · Open access

Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance

Ali Mohammadi, Sorour Abdali, Mohammad Alipour, Mohsen Baghaejah

Journal of Materials Research and Technology, 42, 7745–7760 · Published 1 May 2026 · DOI 10.1016/j.jmrt.2026.05.026

Open full textCite this paper

In brief

“Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance” is a 2026 journal article by Ali Mohammadi and 3 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 3 citations as of 17 November 2026, which puts it in the top 4% of works published in 2026 by citations. It is open access under a CC BY licence: the full text is free to read at Journal of Materials Research and Technology.

Citations
3
Most cited in
2026 (3)
Field-weighted impact
4.36
References
33
Authors
4

Abstract

One of the main challenges with composite coatings is achieving hardness and lubricity. Most existing studies on electrodeposited composites focus on binary systems: Ni–SiC, which enhances hardness but lacks self-lubrication, and Ni–WS 2 , which lowers friction but weakens mechanical strength. The combined incorporation of SiC and a solid lubricant (WS 2 ) introduce co-deposition challenges. This work addresses this gap by optimizing the ternary system to achieve high hardness and effective intrinsic lubricity. The goal of this study is to optimize the Ni-SiC-WS 2 hybrid coatings. The concentration of WS 2 is set at 3 g·L -1 , and the concentration of SiC is varied up to 10 g·L -1 . The optimal concentration of the coating is determined as a mixture of Ni, 3 g·L -1 WS 2 , and 5 g·L -1 SiC. The maximum micro-hardness is 1323±71 HV, representing a 253% improvement over pristine Ni. The coating also has the lowest coefficient of friction, 0.21, and the best corrosion resistance, with I corr = 3.9 ×10 -6 A·dm -2 . The improvement in the mechanical properties of the coating is quantitatively related to the Hall-Petch grain refinement and Orowan dispersion strengthening. The improvement in the corrosion resistance of the coating is due to a two-fold mechanism. Firstly, there is a geometric blocking mechanism, wherein inert nanoparticles block the passage of ions. Secondly, there is an enhanced repassivation of the matrix, facilitated by the grain boundaries. Increasing the concentration of 10 g·L -1 SiC results in catastrophic failure of the coating, due to extreme agglomeration and a critical concentration of lattice microstrain, exceeding 1%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Mohammadi, A., Abdali, S., Alipour, M., & Baghaejah, M. (2026). Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance. Journal of Materials Research and Technology, 42, 7745–7760. https://doi.org/10.1016/j.jmrt.2026.05.026

MLA 9

Mohammadi, Ali, et al. “Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance.” Journal of Materials Research and Technology, vol. 42, 2026, pp. 7745–7760. https://doi.org/10.1016/j.jmrt.2026.05.026.

Chicago

Mohammadi, Ali, Sorour Abdali, Mohammad Alipour, and Mohsen Baghaejah. 2026. “Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance.” Journal of Materials Research and Technology 42: 7745–7760. https://doi.org/10.1016/j.jmrt.2026.05.026.

Harvard

Mohammadi, A. et al. (2026) ‘Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance’, Journal of Materials Research and Technology, 42, pp. 7745–7760. doi:10.1016/j.jmrt.2026.05.026.

IEEE

A. Mohammadi, S. Abdali, M. Alipour, and M. Baghaejah, “Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance,” Journal of Materials Research and Technology, vol. 42, pp. 7745–7760, 2026, doi: 10.1016/j.jmrt.2026.05.026.

BibTeX

@article{mohammadi2026synergistic,
  title     = {{Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance}},
  author    = {Mohammadi, Ali and Abdali, Sorour and Alipour, Mohammad and Baghaejah, Mohsen},
  journal   = {Journal of Materials Research and Technology},
  year      = {2026},
  volume    = {42},
  pages     = {7745--7760},
  doi       = {10.1016/j.jmrt.2026.05.026},
  url       = {https://doi.org/10.1016/j.jmrt.2026.05.026}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Surfaces, Coatings and Films › Electrodeposition and Electroless Coatings

  • microhardness
  • friction coefficient
  • corrosion resistance
  • repassivation
  • nanoparticle agglomeration
  • lattice microstrain

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Mohammadi, A., Abdali, S., Alipour, M., & Baghaejah, M. (2026). Synergistic optimization of SiC concentration in Ni–SiC–WS2 hybrid coatings: Balancing tribology, mechanical properties, and corrosion resistance. Journal of Materials Research and Technology, 42, 7745–7760. https://doi.org/10.1016/j.jmrt.2026.05.026

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Materials Research and Technology: sign in and open the full text from this page.

Who wrote this paper?

Ali Mohammadi, Sorour Abdali, Mohammad Alipour, Mohsen Baghaejah.

What is the DOI of this paper?

10.1016/j.jmrt.2026.05.026, permanently at https://doi.org/10.1016/j.jmrt.2026.05.026. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.