Journal article · 1956 · Open access
Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points
Journal of the Japan Institute of Metals and Materials, 20(11), 615–619 · Published 1 January 1956 · DOI 10.2320/jinstmet1952.20.11_615
In brief
“Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points” is a 1956 journal article by Y ucirc noshin Imai and Masao Izumiyama, published in Journal of the Japan Institute of Metals and Materials. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Journal of the Japan Institute of Metals and Materials.
- Citations
- 0
- Authors
- 2
Abstract
The paper states the results of our study on the transformation of retained austenite to martensite in sub-zero temperature range affected by tempering after quenching from various austenitizing temperatures in oil with ball-bearing steel containing 1.02% carbon and 1.35% chromium as material. The results obtained were as follows. The Ms′ temperature of specimen quenched from low austenitizing temperature is lower than of that quenched from high austenitizing temperature. By tempering prior to sub-zero treatment, the stabilization proceeds rapidly within 1 minute, and the Ms′ point occurs at constant temperature up to 10 minutes, afterwards the retained austenite becomes unstable—the so called conditioning—and consequently the Ms′ temperature rises up a little. The higher the tempering temperature the more rapid this phenomenon. But no change corresponding to this phenomenon could be found in the amount of dilatometric expansion and this suggests that the number of the nuclei taking part in this phenomenon would be only small. No change in the Mf point by tempering could be found in this investigation.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Imai, Y. U. N., & Izumiyama, M. (1956). Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points. Journal of the Japan Institute of Metals and Materials, 20(11), 615–619. https://doi.org/10.2320/jinstmet1952.20.11_615
MLA 9
Imai, Y ucirc noshin, and Masao Izumiyama. “Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points.” Journal of the Japan Institute of Metals and Materials, vol. 20, no. 11, 1956, pp. 615–619. https://doi.org/10.2320/jinstmet1952.20.11_615.
Chicago
Imai, Y ucirc noshin and Masao Izumiyama. 1956. “Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points.” Journal of the Japan Institute of Metals and Materials 20 (11): 615–619. https://doi.org/10.2320/jinstmet1952.20.11_615.
Harvard
Imai, Y. U. N. and Izumiyama, M. (1956) ‘Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points’, Journal of the Japan Institute of Metals and Materials, 20(11), pp. 615–619. doi:10.2320/jinstmet1952.20.11_615.
IEEE
Y. U. N. Imai and M. Izumiyama, “Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points,” Journal of the Japan Institute of Metals and Materials, vol. 20, no. 11, pp. 615–619, 1956, doi: 10.2320/jinstmet1952.20.11_615.
BibTeX
@article{imai1956zero,
title = {{Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points}},
author = {Imai, Y ucirc noshin and Izumiyama, Masao},
journal = {Journal of the Japan Institute of Metals and Materials},
year = {1956},
volume = {20},
number = {11},
pages = {615--619},
doi = {10.2320/jinstmet1952.20.11_615},
url = {https://doi.org/10.2320/jinstmet1952.20.11_615}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- sub-zero treatment
- quenched steel
- tempering
- retained austenite
- martensitic transformation
- martensite start temperature
- austenitizing temperature
- ball bearing steel
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Imai, Y. U. N., & Izumiyama, M. (1956). Sub-Zero Treatment of Quenched Steel (2nd Report). The Effect of Tempering on Ms′ and Mf Points. Journal of the Japan Institute of Metals and Materials, 20(11), 615–619. https://doi.org/10.2320/jinstmet1952.20.11_615
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of the Japan Institute of Metals and Materials: sign in and open the PDF from this page.
Who wrote this paper?
Y ucirc noshin Imai, Masao Izumiyama.
What is the DOI of this paper?
10.2320/jinstmet1952.20.11_615, permanently at https://doi.org/10.2320/jinstmet1952.20.11_615. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.