Journal article · 2018 · Open access

Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system

Yu Dong, Tie‐Gang Wang, Bing Yan, Houjun Qi, Yuyao Guo, Shasha Xu

Procedia Manufacturing, 26, 806–817 · Published 1 January 2018 · DOI 10.1016/j.promfg.2018.07.099

Open PDFView at the publisherCite this paper

In brief

“Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system” is a 2018 journal article by Yu Dong and 5 co-authors, published in Procedia Manufacturing. OpenAlex counts 12 citations as of 19 November 2026, which puts it in the top 7% of works published in 2018 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Manufacturing.

Citations
12
Most cited in
2021 (5)
Field-weighted impact
1.17
References
45
Authors
6

Abstract

The Zr-B-(N) coatings with different N contents were prepared by combining system of high power impulse magnetron sputtering (HiPIMS) and pulsed DC magnetron sputtering (PDCMS). By means of X-ray diffraction analysis, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy, the influence of nitrogen flow ratio on the coating microstructure and characteristics were investigated systematically, including the deposition rate, chemical compositions, phase constituents, chemical bonding, as well as cross-sectional morphologies. Meanwhile, the hardness and adhesion of above coatings were also evaluated by micro-indentation method and a scratch tester. And the tribological behaviour also was tested by tribometer. The maximal hardness reached 25.35 GPa which was attributed to the formation of nano-composite structure. After doping N element, all the coatings possessed the compressive stresses, and critical load increased gradually with increasing N content in the coating. By comparison, the Zr-B-N coating presented the best wear resistance as the N 2 flow ratio was 6 sccm.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Dong, Y., Wang, T., Yan, B., Qi, H., Guo, Y., & Xu, S. (2018). Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system. Procedia Manufacturing, 26, 806–817. https://doi.org/10.1016/j.promfg.2018.07.099

MLA 9

Dong, Yu, et al. “Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system.” Procedia Manufacturing, vol. 26, 2018, pp. 806–817. https://doi.org/10.1016/j.promfg.2018.07.099.

Chicago

Dong, Yu, Tie‐Gang Wang, Bing Yan, Houjun Qi, Yuyao Guo, and Shasha Xu. 2018. “Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system.” Procedia Manufacturing 26: 806–817. https://doi.org/10.1016/j.promfg.2018.07.099.

Harvard

Dong, Y. et al. (2018) ‘Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system’, Procedia Manufacturing, 26, pp. 806–817. doi:10.1016/j.promfg.2018.07.099.

IEEE

Y. Dong, T. Wang, B. Yan, H. Qi, Y. Guo, and S. Xu, “Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system,” Procedia Manufacturing, vol. 26, pp. 806–817, 2018, doi: 10.1016/j.promfg.2018.07.099.

BibTeX

@article{dong2018study,
  title     = {{Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system}},
  author    = {Dong, Yu and Wang, Tie‐Gang and Yan, Bing and Qi, Houjun and Guo, Yuyao and Xu, Shasha},
  journal   = {Procedia Manufacturing},
  year      = {2018},
  volume    = {26},
  pages     = {806--817},
  doi       = {10.1016/j.promfg.2018.07.099},
  url       = {https://doi.org/10.1016/j.promfg.2018.07.099}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202033
202155
202222
202522

Its field-weighted citation impact is 1.17: it has been cited 1.17 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • zirconium boride
  • nitrogen doping
  • high power impulse magnetron sputtering
  • pulsed DC magnetron sputtering
  • nitrogen flow ratio
  • coating microstructure
  • hardness
  • coating adhesion

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Dong, Y., Wang, T., Yan, B., Qi, H., Guo, Y., & Xu, S. (2018). Study on the microstructure and mechanical properties of Zr-B-(N) tool coatings prepared by hybrid coating system. Procedia Manufacturing, 26, 806–817. https://doi.org/10.1016/j.promfg.2018.07.099

How many times has this paper been cited?

12 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Procedia Manufacturing: sign in and open the PDF from this page.

Who wrote this paper?

Yu Dong, Tie‐Gang Wang, Bing Yan, Houjun Qi, Yuyao Guo, Shasha Xu.

What is the DOI of this paper?

10.1016/j.promfg.2018.07.099, permanently at https://doi.org/10.1016/j.promfg.2018.07.099. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.