Journal article · 2020 · Open access

Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range

Penglin Zhang, Gaopan Zhao, Wen‐Zhen Wang, Bin Wang, Peiying Shi, Gang Qi, Gewen Yi

Metals, 10(2), 268 · Published 18 February 2020 · DOI 10.3390/met10020268

Open PDFView at the publisherCite this paper

In brief

“Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range” is a 2020 journal article by Penglin Zhang and 6 co-authors, published in Metals. OpenAlex counts 9 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
9
Most cited in
2022 (3)
Field-weighted impact
0.74
References
38
Authors
7

Abstract

A Cr-free Ni-based self-lubricating composites with MoS2 and Ag as lubricants were fabricated by the powder metallurgy method. The microstructures were examined. The mechanical properties and tribological behaviors of the composites were evaluated from room temperature to 800 °C. The fractography was observed and the fracture mechanisms were analyzed. The morphologies and the phase compositions of worn surfaces were determined and the wear mechanisms were elaborated. The results indicate that MoS2 did not completely decompose after sintering, and the NiMoAl-MoS2-Ag composite has the best tribological properties (0.22, 1.68 × 10−5) at 800 °C. The main wear mechanisms are micro-ploughing and plastic deformation. The improvement of tribological properties was attributed to the formation of the lubricating film consisting of NiO, Mo oxides, various molybdates, and Ag particles. The reactions resulting in these compositions are proposed. The mechanical properties degrade with the rise of temperature and the addition of lubricants. Both NiMoAl and NiMoAlAg alloys exhibit micro-void accumulation fracture while the composites with MoS2 reveal intergranular fracture.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhang, P., Zhao, G., Wang, W., Wang, B., Shi, P., Qi, G., & Yi, G. (2020). Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range. Metals, 10(2), 268. https://doi.org/10.3390/met10020268

MLA 9

Zhang, Penglin, et al. “Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range.” Metals, vol. 10, no. 2, 2020, p. 268. https://doi.org/10.3390/met10020268.

Chicago

Zhang, Penglin, Gaopan Zhao, Wen‐Zhen Wang, Bin Wang, Peiying Shi, Gang Qi, and Gewen Yi. 2020. “Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range.” Metals 10 (2): 268. https://doi.org/10.3390/met10020268.

Harvard

Zhang, P. et al. (2020) ‘Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range’, Metals, 10(2), p. 268. doi:10.3390/met10020268.

IEEE

P. Zhang et al., “Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range,” Metals, vol. 10, no. 2, p. 268, 2020, doi: 10.3390/met10020268.

BibTeX

@article{zhang2020study,
  title     = {{Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range}},
  author    = {Zhang, Penglin and Zhao, Gaopan and Wang, Wen‐Zhen and Wang, Bin and Shi, Peiying and Qi, Gang and Yi, Gewen},
  journal   = {Metals},
  year      = {2020},
  volume    = {10},
  number    = {2},
  pages     = {268},
  doi       = {10.3390/met10020268},
  url       = {https://doi.org/10.3390/met10020268}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202022
202233
202311
202411
202522

Its field-weighted citation impact is 0.74: it has been cited 0.74 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Powder Metallurgy Techniques and Materials

  • self-lubricating composites
  • MoS2
  • tribological properties
  • high-temperature wear
  • wear mechanisms
  • microploughing
  • plastic deformation
  • lubricating film formation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhang, P., Zhao, G., Wang, W., Wang, B., Shi, P., Qi, G., & Yi, G. (2020). Study on the Mechanical and Tribological Properties and the Mechanisms of Cr-Free Ni-Based Self-Lubricating Composites at a Wide Temperature Range. Metals, 10(2), 268. https://doi.org/10.3390/met10020268

How many times has this paper been cited?

9 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metals: sign in and open the PDF from this page.

Who wrote this paper?

Penglin Zhang, Gaopan Zhao, Wen‐Zhen Wang, Bin Wang, Peiying Shi, Gang Qi, Gewen Yi.

What is the DOI of this paper?

10.3390/met10020268, permanently at https://doi.org/10.3390/met10020268. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.