Journal article · 2020 · Open access
Study on friction reduction by combining DLC film and surface patterning
The Proceedings of Mechanical Engineering Congress Japan, 2020(0), J13120 · Published 1 January 2020 · DOI 10.1299/jsmemecj.2020.j13120
In brief
“Study on friction reduction by combining DLC film and surface patterning” is a 2020 journal article by Shion Saito and 3 co-authors, published in The Proceedings of Mechanical Engineering Congress Japan. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at The Proceedings of Mechanical Engineering Congress Japan.
- Citations
- 0
- Authors
- 4
Abstract
In this study, we determined the friction characteristics of micro–textured surfaces coated with diamond–like carbon (DLC) film. The friction force was measured using a ball-on-plate type reciprocating friction test apparatus. The substrate specimens with DLC film were rubbed with Al₂O₃ ball having a diameter of 9.5 mm, under a load of 1 N and 5 N at a sliding speed of 5 mm/s. The measurements were conducted in ambient air and in a vacuum of 2.0 × 10-4 Pa. In ambient air, the non-textured substrate showed a wide range of friction coefficient from 0.1 to 0.24; the micro-grooved substrate showed stable friction coefficients of around 0.09. The friction coefficient on non-textured substrate exhibited a lower friction coefficient than micro-grooved substrate under the vacuum condition. This trend was the opposite of the friction coefficient in ambient air.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Saito, S., ANDO, Y., Ohana, T., & Nakano, M. (2020). Study on friction reduction by combining DLC film and surface patterning. The Proceedings of Mechanical Engineering Congress Japan, 2020(0), J13120. https://doi.org/10.1299/jsmemecj.2020.j13120
MLA 9
Saito, Shion, et al. “Study on friction reduction by combining DLC film and surface patterning.” The Proceedings of Mechanical Engineering Congress Japan, vol. 2020, no. 0, 2020, p. J13120. https://doi.org/10.1299/jsmemecj.2020.j13120.
Chicago
Saito, Shion, Yasuhisa ANDO, Tsuguyori Ohana, and Miki Nakano. 2020. “Study on friction reduction by combining DLC film and surface patterning.” The Proceedings of Mechanical Engineering Congress Japan 2020 (0): J13120. https://doi.org/10.1299/jsmemecj.2020.j13120.
Harvard
Saito, S. et al. (2020) ‘Study on friction reduction by combining DLC film and surface patterning’, The Proceedings of Mechanical Engineering Congress Japan, 2020(0), p. J13120. doi:10.1299/jsmemecj.2020.j13120.
IEEE
S. Saito, Y. ANDO, T. Ohana, and M. Nakano, “Study on friction reduction by combining DLC film and surface patterning,” The Proceedings of Mechanical Engineering Congress Japan, vol. 2020, no. 0, p. J13120, 2020, doi: 10.1299/jsmemecj.2020.j13120.
BibTeX
@article{saito2020study,
title = {{Study on friction reduction by combining DLC film and surface patterning}},
author = {Saito, Shion and ANDO, Yasuhisa and Ohana, Tsuguyori and Nakano, Miki},
journal = {The Proceedings of Mechanical Engineering Congress Japan},
year = {2020},
volume = {2020},
number = {0},
pages = {J13120},
doi = {10.1299/jsmemecj.2020.j13120},
url = {https://doi.org/10.1299/jsmemecj.2020.j13120}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- friction reduction
- diamond-like carbon films
- surface patterning
- microgrooved surfaces
- friction coefficient
- vacuum friction
- tribology
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Saito, S., ANDO, Y., Ohana, T., & Nakano, M. (2020). Study on friction reduction by combining DLC film and surface patterning. The Proceedings of Mechanical Engineering Congress Japan, 2020(0), J13120. https://doi.org/10.1299/jsmemecj.2020.j13120
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at The Proceedings of Mechanical Engineering Congress Japan: sign in and open the PDF from this page.
Who wrote this paper?
Shion Saito, Yasuhisa ANDO, Tsuguyori Ohana, Miki Nakano.
What is the DOI of this paper?
10.1299/jsmemecj.2020.j13120, permanently at https://doi.org/10.1299/jsmemecj.2020.j13120. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.