Journal article · 2010 · Open access

Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature

Chuan Qi Fu, Wang Zhou

Applied Mechanics and Materials, 33, 458–462 · Published 1 October 2010 · DOI 10.4028/www.scientific.net/amm.33.458

Open full textCite this paper

In brief

“Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature” is a 2010 journal article by Chuan Qi Fu and Wang Zhou, published in Applied Mechanics and Materials. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Mechanics and Materials.

Citations
3
Most cited in
2023 (2)
References
4
Authors
2

Abstract

The molybdenum disulfide(MoS2)/copper(Cu)-ferrum(Fe) matrix self-lubricating composites with various amounts of MoS2 additives were prepared by induction heating sintering method combined with the alloying of the Cu-Fe matrix with various metallic elements. As the temperature was increased from room temperature to 800°C, the mechanical and tribological properties of the composites were measured using the universal testing machine and MRH-3 friction-wear tester. The phase compositions and worn surface morphologies of the composites were analyzed by means of X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Meanwhile, wear mechanisms were discussed. It was found that the mechanical and friction/wear properties of MoS2/Cu-Fe matrix self-lubricating composites were related to the induction frequencies and the contents of the MoS2 as the solid lubricant. The increased MoS2 content resulted in increased mechanical and friction/wear properties at first and then decreased subsequently. The composites with proper MoS2 contents and induction frequencies have the lower the friction coefficients and wear rate at room temperature to 800°C. Meanwhile, the self-lubricating films were mainly made up of some compositions, such as pearlite, cementite, sulphide, solid solution alloy of Mo and Fe, molybdenum oxide in elevated temperature; the wear mechanism of composites has been changed from abrasive wear to ploughing wear.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fu, C. Q., & Zhou, W. (2010). Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature. Applied Mechanics and Materials, 33, 458–462. https://doi.org/10.4028/www.scientific.net/amm.33.458

MLA 9

Fu, Chuan Qi, and Wang Zhou. “Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature.” Applied Mechanics and Materials, vol. 33, 2010, pp. 458–462. https://doi.org/10.4028/www.scientific.net/amm.33.458.

Chicago

Fu, Chuan Qi and Wang Zhou. 2010. “Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature.” Applied Mechanics and Materials 33: 458–462. https://doi.org/10.4028/www.scientific.net/amm.33.458.

Harvard

Fu, C. Q. and Zhou, W. (2010) ‘Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature’, Applied Mechanics and Materials, 33, pp. 458–462. doi:10.4028/www.scientific.net/amm.33.458.

IEEE

C. Q. Fu and W. Zhou, “Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature,” Applied Mechanics and Materials, vol. 33, pp. 458–462, 2010, doi: 10.4028/www.scientific.net/amm.33.458.

BibTeX

@article{fu2010study,
  title     = {{Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature}},
  author    = {Fu, Chuan Qi and Zhou, Wang},
  journal   = {Applied Mechanics and Materials},
  year      = {2010},
  volume    = {33},
  pages     = {458--462},
  doi       = {10.4028/www.scientific.net/amm.33.458},
  url       = {https://doi.org/10.4028/www.scientific.net/amm.33.458}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis

  • self-lubricating composites
  • induction sintering
  • solid lubricants
  • MoS2
  • friction coefficient
  • wear rate
  • wear mechanisms
  • induction frequency

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Fu, C. Q., & Zhou, W. (2010). Study of Tribological Properties of MoS2/Cu-Fe Matrix Self-Lubricating Composites Prepared by Induction Sintering at Elevated Temperature. Applied Mechanics and Materials, 33, 458–462. https://doi.org/10.4028/www.scientific.net/amm.33.458

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Applied Mechanics and Materials: sign in and open the full text from this page.

Who wrote this paper?

Chuan Qi Fu, Wang Zhou.

What is the DOI of this paper?

10.4028/www.scientific.net/amm.33.458, permanently at https://doi.org/10.4028/www.scientific.net/amm.33.458. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.