Dissertation · 2023 · Open access

Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film

César Augusto Antônio

LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 27 March 2023

Open full textCite this paper

In brief

“Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film” is a 2023 dissertation by César Augusto Antônio, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).

Citations
0
Authors
1

Abstract

Diamond-like carbon (DLC) films have excellent mechanical properties but have difficulties in adhering to metallic surfaces. Nitrogen doping in the structure of DLC films provides better adhesion of the film to the substrate, while the application of multilayer films can improve the mechanical properties of the films. The objective of this work is to carry out the deposition of DLC film in the monolayer and multilayer arrangement and to verify the influence of nitrogen doping on the mechanical and tribological properties of the DLC film deposited on the AISI 321 H stainless steel substrate, using the PECVD deposition method with DC-Pulsed source. For the deposition of the DLC film, a plasma ablation cleaning of the metallic substrate was performed with 80%Ar and 20%H2, then an organosilicon interlayer was deposited with 70%HMDSO and 30%Ar, and finally deposited the DLC film was deposited using 10%Ar and 90% CH4. In the deposition of nitrogen-doped DLC (DLCN), after cleaning the substrates by ablation and deposition of the interlayer, 70% CH4 and 30% N2 gas was used for film deposition. The multilayer films were deposited by varying the ordering of the DLC and DLCN films. A gradient deposition of the nitrogen-doped DLC film was also performed. The films were characterized by visual analysis, analysis of the physical-chemical structure evaluated by metallographic via SEM and EDS, Raman spectroscopy and infrared spectroscopy, adhesion test by Rockwell C hardness, wear resistance, nanohardness test and scratch test. The monolayer DLC and DLCN films demonstrated uniform layers, with bands in the Raman and infrared spectra characteristic of the film. All depositions exhibited high wear resistance compared to the base material. The DLCN film showed superior adhesion compared to the DLC film, with similar hardness and modulus of elasticity between the films. In the deposition of the multilayer films, an acceptable adherence to the substrate was obtained, with an increase in wear resistance in relation to the substrate, but with the formation of defects in the film due to the drop in temperature that occurred during the treatment steps. The DLC film deposited in gradient showed the best adhesion and wear resistance results, maintaining hardness similar to the DLC and DLCN films, explained by the synergy of properties of the DLCN and DLC films deposited sequentially. It is concluded that DLC films significantly improve the tribological and surface mechanical properties of the material studied, the multilayer DLC films deposited without external heating present defects and gradient films proved to be an alternative to increase the film properties while maintaining good adhesion…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Antônio, C. A. (2023). Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://repositorio.ufscar.br/handle/20.500.14289/18431

MLA 9

Antônio, César Augusto. “Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2023. https://repositorio.ufscar.br/handle/20.500.14289/18431.

Chicago

Antônio, César Augusto. 2023. “Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://repositorio.ufscar.br/handle/20.500.14289/18431.

Harvard

Antônio, C. A. (2023) ‘Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: https://repositorio.ufscar.br/handle/20.500.14289/18431.

IEEE

C. A. Antônio, “Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2023.

BibTeX

@phdthesis{antonio2023study,
  title     = {{Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film}},
  author    = {Antônio, César Augusto},
  year      = {2023},
  url       = {https://repositorio.ufscar.br/handle/20.500.14289/18431}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • nitrogen-doped diamond-like carbon
  • tribological properties
  • wear resistance
  • film adhesion
  • AISI 321 stainless steel
  • PECVD deposition
  • nanohardness
  • scratch test

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Antônio, C. A. (2023). Study of Tribological and Mechanical Properties of nitrogen-doped multilayer DLC film. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://repositorio.ufscar.br/handle/20.500.14289/18431

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.

Who wrote this paper?

César Augusto Antônio.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.