Journal article · 2016 · Open access

Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition

Marta Michalska-Domańska, Paweł Jóźwik, Bartłomiej Jankiewicz, Bartosz Bartosewicz, Dariusz Siemiaszko, Wojciech Jerzy Stępniowski, Z. Bojar

Materials Today Proceedings, 3, S171–S177 · Published 1 January 2016 · DOI 10.1016/j.matpr.2016.02.029

Free PDFView at the publisherCite this paper

In brief

“Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition” is a 2016 journal article by Marta Michalska-Domańska and 6 co-authors, published in Materials Today Proceedings. OpenAlex counts 8 citations as of 16 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Materials Today Proceedings.

Citations
8
Most cited in
2020 (3)
Field-weighted impact
0.37
References
20
Authors
7

Abstract

The 50 μm thick Ni3Al thin foils were investigated as the solid-state catalyst. In this study, a cyclic Ni3Al catalysts pretreatment process was performed to obtain more uniform carbon nanotubes and gradual fragmentation of Ni nanoparticles. In temperature about 500oC the cyclic methanol decomposition was conducted. The change of hydrogen yield in methanol decomposition over tested catalysts in following cyclic pretreatment was analyzed in details. The carbon nanostructures formed during methanol decomposition was investigated by SEM, BET, XRD and Raman spectroscopy. It has been proven that the Ni nanoparticles agglomerated with following consecutive cycles, caused gradual decrease of methanol conversion and hydrogen yield in every next cycle.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Michalska-Domańska, M., Jóźwik, P., Jankiewicz, B., Bartosewicz, B., Siemiaszko, D., Stępniowski, W. J., & Bojar, Z. (2016). Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition. Materials Today Proceedings, 3, S171–S177. https://doi.org/10.1016/j.matpr.2016.02.029

MLA 9

Michalska-Domańska, Marta, et al. “Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition.” Materials Today Proceedings, vol. 3, 2016, pp. S171–S177. https://doi.org/10.1016/j.matpr.2016.02.029.

Chicago

Michalska-Domańska, Marta, Paweł Jóźwik, Bartłomiej Jankiewicz, Bartosz Bartosewicz, Dariusz Siemiaszko, Wojciech Jerzy Stępniowski, and Z. Bojar. 2016. “Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition.” Materials Today Proceedings 3: S171–S177. https://doi.org/10.1016/j.matpr.2016.02.029.

Harvard

Michalska-Domańska, M. et al. (2016) ‘Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition’, Materials Today Proceedings, 3, pp. S171–S177. doi:10.1016/j.matpr.2016.02.029.

IEEE

M. Michalska-Domańska et al., “Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition,” Materials Today Proceedings, vol. 3, pp. S171–S177, 2016, doi: 10.1016/j.matpr.2016.02.029.

BibTeX

@article{michalskadomanska2016study,
  title     = {{Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition}},
  author    = {Michalska-Domańska, Marta and Jóźwik, Paweł and Jankiewicz, Bartłomiej and Bartosewicz, Bartosz and Siemiaszko, Dariusz and Stępniowski, Wojciech Jerzy and Bojar, Z.},
  journal   = {Materials Today Proceedings},
  year      = {2016},
  volume    = {3},
  pages     = {S171--S177},
  doi       = {10.1016/j.matpr.2016.02.029},
  url       = {https://doi.org/10.1016/j.matpr.2016.02.029}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201822
201922
202033
202411

Its field-weighted citation impact is 0.37: it has been cited 0.37 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming

  • catalyst pretreatment
  • carbon nanotubes
  • methanol decomposition
  • hydrogen yield
  • catalyst fragmentation
  • solid catalysts
  • thin foils
  • carbon nanostructures

Work with this paper

Most-cited papers in Chemical Engineering

All highly cited Chemical Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Michalska-Domańska, M., Jóźwik, P., Jankiewicz, B., Bartosewicz, B., Siemiaszko, D., Stępniowski, W. J., & Bojar, Z. (2016). Study of Cyclic Ni3Al Catalyst Pretreatment Process for Uniform Carbon Nanotubes Formation and Improved Hydrogen Yield in Methanol Decomposition. Materials Today Proceedings, 3, S171–S177. https://doi.org/10.1016/j.matpr.2016.02.029

How many times has this paper been cited?

8 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Materials Today Proceedings.

Who wrote this paper?

Marta Michalska-Domańska, Paweł Jóźwik, Bartłomiej Jankiewicz, Bartosz Bartosewicz, Dariusz Siemiaszko, Wojciech Jerzy Stępniowski, Z. Bojar.

What is the DOI of this paper?

10.1016/j.matpr.2016.02.029. The permanent link is https://doi.org/10.1016/j.matpr.2016.02.029.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.