Paper · 2013 · Open access

Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation

Danuta Stróż, Jakub Palka, Zdzisław Lekston, Grzegorz Dercz

Materials science forum, 738-739, 501–505 · Published 25 January 2013 · DOI 10.4028/www.scientific.net/msf.738-739.501

Open full textCite this paper

In brief

“Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation” is a 2013 paper by Danuta Stróż and 3 co-authors, published in Materials science forum. OpenAlex counts 3 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials science forum.

Citations
3
Most cited in
2016 (1)
Field-weighted impact
0.12
References
5
Authors
4

Abstract

The results presented here concern two NiTi alloys (near-equiatomic NiTi and Ni-rich alloy) subjected to plastic deformation by compression combined with reversion oscillating torsion. The maximal strain obtained was εc = 6.20. Finally the alloys were annealed at the temperature range 300 – 500°C for 1 hour. The structure of the as-prepared alloys was studied with the use of temperature X-ray diffraction and TEM observations. Also the DSC and bend and free recovery ASTM tests were carried out. It was found that the structure consists of a mixture of highly deformed B2 parent phase and B19’ martensite. The TEM studies revealed some amorphous areas in the most strained region of the samples. Annealing at lower temperatures caused formation of nanocrystalline structure that grew to the microcrystalline and finally well-defined polygonized structure in annealed at 500°C specimens. Multi-stage transformation was observed in the annealed at lower temperatures samples.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Stróż, D., Palka, J., Lekston, Z., & Dercz, G. (2013). Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation. Materials science forum, 738-739, 501–505. https://doi.org/10.4028/www.scientific.net/msf.738-739.501

MLA 9

Stróż, Danuta, et al. “Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation.” Materials science forum, vol. 738-739, 2013, pp. 501–505. https://doi.org/10.4028/www.scientific.net/msf.738-739.501.

Chicago

Stróż, Danuta, Jakub Palka, Zdzisław Lekston, and Grzegorz Dercz. 2013. “Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation.” Materials science forum 738-739: 501–505. https://doi.org/10.4028/www.scientific.net/msf.738-739.501.

Harvard

Stróż, D. et al. (2013) ‘Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation’, Materials science forum, 738-739, pp. 501–505. doi:10.4028/www.scientific.net/msf.738-739.501.

IEEE

D. Stróż, J. Palka, Z. Lekston, and G. Dercz, “Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation,” Materials science forum, vol. 738-739, pp. 501–505, 2013, doi: 10.4028/www.scientific.net/msf.738-739.501.

BibTeX

@article{stroz2013structure,
  title     = {{Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation}},
  author    = {Stróż, Danuta and Palka, Jakub and Lekston, Zdzisław and Dercz, Grzegorz},
  journal   = {Materials science forum},
  year      = {2013},
  volume    = {738-739},
  pages     = {501--505},
  doi       = {10.4028/www.scientific.net/msf.738-739.501},
  url       = {https://doi.org/10.4028/www.scientific.net/msf.738-739.501}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201611
202411
202611

Its field-weighted citation impact is 0.12: it has been cited 0.12 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • NiTi
  • severe plastic deformation
  • annealing
  • B19' martensite
  • amorphous regions
  • nanocrystalline structure
  • polygonization
  • martensitic transformation

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Stróż, D., Palka, J., Lekston, Z., & Dercz, G. (2013). Structure and Properties of NiTi Shape Memory Alloys after Severe Plastic Deformation. Materials science forum, 738-739, 501–505. https://doi.org/10.4028/www.scientific.net/msf.738-739.501

How many times has this paper been cited?

3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials science forum: sign in and open the full text from this page.

Who wrote this paper?

Danuta Stróż, Jakub Palka, Zdzisław Lekston, Grzegorz Dercz.

What is the DOI of this paper?

10.4028/www.scientific.net/msf.738-739.501, permanently at https://doi.org/10.4028/www.scientific.net/msf.738-739.501. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.