Journal article · 2025 · Open access

Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators

Shivashankar Hiremath, Anirudh G Bhat, Kevin Amith Mathias, M. H. Shrishail, Tae‐Won Kim

Engineering Research Express, 7(3), 035411 · Published 7 August 2025 · DOI 10.1088/2631-8695/adf48a

Open PDFView at the publisherCite this paper

In brief

“Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators” is a 2025 journal article by Shivashankar Hiremath and 4 co-authors, published in Engineering Research Express. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 6% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Engineering Research Express.

Citations
2
Most cited in
2026 (2)
Field-weighted impact
0.34
References
70
Authors
5

Abstract

Soft actuators are an emerging field driven by breakthroughs in the production of soft materials with deformation properties suitable for grabbing, picking, and other specialized industry operations. In the present work, a design of the experiment was used to optimize the chosen parameters, and a soft pneumatic actuator was made utilizing the most suitable and flexible material via the fast-prototyping approach. Computational simulations were adopted for soft pneumatic actuators with varying shapes, materials, groove numbers, and channel thicknesses. The semioval-shaped actuators deformed more than the rectangular and triangular-shaped actuators did, and a semioval-shaped soft actuator achieved a maximum deformation of 6.09 cm. The number of grooves increased to 10, 15, and 20, with a greater number of grooves causing greater distortion in the soft actuator. However, the 15-grooved actuator was the best, with a maximum deformation of 5.6 cm. The size of the pressure inlet channel is very important when directing the air pressure in the soft actuator. Thus, the soft actuator had tolerable and controlled deformation at the optimum of a 2 mm thick channel. Acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and thermoplastic polyurethane (TPU) materials were selected for numerical analysis; TPU materials are more suitable and flexible materials for the development of soft actuators. The TPU material was accurately printed via appropriate printing parameters and the fused deposition method. Its deformation behavior was investigated, and the results were compared between numerical and experimental measurements. The relative errors between the experimental and numerical output ranged from 5% to 23%, proving that it is challenging to arrive at a perfect solution. As a result, the task could be prolonged for further examination to achieve the greatest flawless deformation to satisfy the predicted result.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hiremath, S., Bhat, A. G., Mathias, K. A., Shrishail, M. H., & Kim, T. (2025). Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators. Engineering Research Express, 7(3), 035411. https://doi.org/10.1088/2631-8695/adf48a

MLA 9

Hiremath, Shivashankar, et al. “Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators.” Engineering Research Express, vol. 7, no. 3, 2025, p. 035411. https://doi.org/10.1088/2631-8695/adf48a.

Chicago

Hiremath, Shivashankar, Anirudh G Bhat, Kevin Amith Mathias, M. H. Shrishail, and Tae‐Won Kim. 2025. “Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators.” Engineering Research Express 7 (3): 035411. https://doi.org/10.1088/2631-8695/adf48a.

Harvard

Hiremath, S. et al. (2025) ‘Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators’, Engineering Research Express, 7(3), p. 035411. doi:10.1088/2631-8695/adf48a.

IEEE

S. Hiremath, A. G. Bhat, K. A. Mathias, M. H. Shrishail, and T. Kim, “Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators,” Engineering Research Express, vol. 7, no. 3, p. 035411, 2025, doi: 10.1088/2631-8695/adf48a.

BibTeX

@article{hiremath2025structural,
  title     = {{Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators}},
  author    = {Hiremath, Shivashankar and Bhat, Anirudh G and Mathias, Kevin Amith and Shrishail, M. H. and Kim, Tae‐Won},
  journal   = {Engineering Research Express},
  year      = {2025},
  volume    = {7},
  number    = {3},
  pages     = {035411},
  doi       = {10.1088/2631-8695/adf48a},
  url       = {https://doi.org/10.1088/2631-8695/adf48a}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft pneumatic actuators
  • 3D printing
  • structural optimization
  • actuator deformation
  • groove number
  • channel thickness
  • thermoplastic polyurethane
  • fused deposition modeling

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hiremath, S., Bhat, A. G., Mathias, K. A., Shrishail, M. H., & Kim, T. (2025). Structural optimization and performance analysis of 3D-printed pneumatically operated soft actuators. Engineering Research Express, 7(3), 035411. https://doi.org/10.1088/2631-8695/adf48a

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Engineering Research Express: sign in and open the PDF from this page.

Who wrote this paper?

Shivashankar Hiremath, Anirudh G Bhat, Kevin Amith Mathias, M. H. Shrishail, Tae‐Won Kim.

What is the DOI of this paper?

10.1088/2631-8695/adf48a, permanently at https://doi.org/10.1088/2631-8695/adf48a. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.