Journal article · 2018 · Open access

Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering

Fanjing Wu, Lihua Yu, Hongbo Ju, Isaac Asempah, Junhua Xu

Coatings, 8(2), 50 · Published 29 January 2018 · DOI 10.3390/coatings8020050

Open PDFView at the publisherCite this paper

In brief

“Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering” is a 2018 journal article by Fanjing Wu and 4 co-authors, published in Coatings. OpenAlex counts 31 citations as of 17 November 2026, which puts it in the top 8% of works published in 2018 by citations. It is open access under a CC BY licence: the full text is free to read at Coatings.

Citations
31
Most cited in
2022 (6)
Field-weighted impact
1.90
References
31
Authors
5

Abstract

In this study, reactive magnetron sputtering was applied for preparing NbCN-Ag films with different Ag additions. Ag contents in the as-deposited NbCN-Ag films were achieved by adjusting Ag target power. The composition, microstructure, mechanical properties, and tribological properties were characterized using energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), high resolution transmission electron microscopy (HRTEM), Raman spectrometry, nano-indentation, and high-temperature sliding wear tests. Results indicated that face-centered cubic (fcc) NbN, hexagonal close-packed (hcp) NbN and fcc Ag, amorphous C and amorphous CNx phase co-existed in the as-deposited NbCN-Ag films. After doping with 2.0 at.% Ag, the hardness and elastic modulus reached a maximum value of 33 GPa and 340 GPa, respectively. Tribological properties were enhanced by adding Ag in NbCN-Ag films at room temperature. When the test temperature rose from 300 to 500 °C, the addition of Ag was found beneficial for the friction properties, showing a lowest friction coefficient of ~0.35 for NbCN-12.9 at.% Ag films at 500 °C. This was mainly attributed to the existence of AgOx, NbOx, and AgNbOx lubrication phases that acted as solid lubricants to modify the wear mechanism.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Wu, F., Yu, L., Ju, H., Asempah, I., & Xu, J. (2018). Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering. Coatings, 8(2), 50. https://doi.org/10.3390/coatings8020050

MLA 9

Wu, Fanjing, et al. “Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering.” Coatings, vol. 8, no. 2, 2018, p. 50. https://doi.org/10.3390/coatings8020050.

Chicago

Wu, Fanjing, Lihua Yu, Hongbo Ju, Isaac Asempah, and Junhua Xu. 2018. “Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering.” Coatings 8 (2): 50. https://doi.org/10.3390/coatings8020050.

Harvard

Wu, F. et al. (2018) ‘Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering’, Coatings, 8(2), p. 50. doi:10.3390/coatings8020050.

IEEE

F. Wu, L. Yu, H. Ju, I. Asempah, and J. Xu, “Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering,” Coatings, vol. 8, no. 2, p. 50, 2018, doi: 10.3390/coatings8020050.

BibTeX

@article{wu2018structural,
  title     = {{Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering}},
  author    = {Wu, Fanjing and Yu, Lihua and Ju, Hongbo and Asempah, Isaac and Xu, Junhua},
  journal   = {Coatings},
  year      = {2018},
  volume    = {8},
  number    = {2},
  pages     = {50},
  doi       = {10.3390/coatings8020050},
  url       = {https://doi.org/10.3390/coatings8020050}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201822
201955
202044
202122
202266
202355
202433
202522
202622

Its field-weighted citation impact is 1.90: it has been cited 1.90 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • reactive magnetron sputtering
  • silver doping
  • niobium nitride
  • amorphous carbon
  • hardness
  • elastic modulus
  • tribological properties
  • high-temperature sliding wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Wu, F., Yu, L., Ju, H., Asempah, I., & Xu, J. (2018). Structural, Mechanical and Tribological Properties of NbCN-Ag Nanocomposite Films Deposited by Reactive Magnetron Sputtering. Coatings, 8(2), 50. https://doi.org/10.3390/coatings8020050

How many times has this paper been cited?

31 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Coatings: sign in and open the PDF from this page.

Who wrote this paper?

Fanjing Wu, Lihua Yu, Hongbo Ju, Isaac Asempah, Junhua Xu.

What is the DOI of this paper?

10.3390/coatings8020050, permanently at https://doi.org/10.3390/coatings8020050. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.