Journal article · 1996 · Open access
Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films
Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 14(1), 56–62 · Published 1 January 1996 · DOI 10.1116/1.579880
In brief
“Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films” is a 1996 journal article by H. Sjöström and 5 co-authors, published in Journal of Vacuum Science & Technology A Vacuum Surfaces and Films. OpenAlex counts 232 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Durham Research Online (Durham University).
- Citations
- 232
- Most cited in
- 2016 (5)
- Field-weighted impact
- 46.47
- Authors
- 6
Abstract
This article reports on the structure and mechanical properties of CNx thin films deposited by unbalanced reactive magnetron sputtering of C in N2 discharges. The films were grown on Si(001) substrates kept at temperatures (Ts) between 150 and 600 °C. Depending on Ts, the films contained between 15 and 26 at. % N. X-ray photoelectron spectroscopy of samples typically showed two peaks in the C 1s core level spectrum (centered at 284.5 and 286.2 eV) and two peaks in the N 1s core level spectrum (centered at 398.4 and 400.3 eV). This indicates that there are two types of C–N bonds where N is bonded to both sp2- and sp3-coordinated C atoms in the as-deposited films. Transmission electron microscopy showed that the films produced in the temperature range 200≤Ts≤600 °C had a highly textured, turbostraticlike structure with the c axis in the plane of the film. The basal planes in this structure were found to be buckled and bent due to incorporation of N in substitutional sites. By contrast, films produced at Ts=150 °C were generally amorphous, but contained ∼3 nm diamond clusters. The mechanical properties were evaluated in nanoindentation experiments. Load versus deflection curves showed that the 0.3 μm films grown at Ts≥200 °C had very high elastic recoveries with values up to 85% of the total indentation displacement. Analyses of the shapes of the load versus deflection curves, using a modeling approach that takes into account the elastic and plastic properties of both the film and the substrate, indicate that the contact deformation of the CNx films was predominantly elastic and the films’ hardness values were estimated to be in the range 40–60 GPa. The high hardness and elasticity are proposed to be due to the buckling of the graphitic basal planes, resulting in a structure where the sp2-bonded basal planes are terminated with N bonded to sp3-hybridized carbon atoms that result in a dense, three dimensional, covalently bonded network.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sjöström, H., Hultman, L., Sundgren, J., Hainsworth, S. V., Page, T. F., & Theunissen, G. (1996). Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 14(1), 56–62. https://doi.org/10.1116/1.579880
MLA 9
Sjöström, H., et al. “Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films.” Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, vol. 14, no. 1, 1996, pp. 56–62. https://doi.org/10.1116/1.579880.
Chicago
Sjöström, H., Lars Hultman, J.‐E. Sundgren, S. V. Hainsworth, T. F. Page, and G.S.A.M. Theunissen. 1996. “Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films.” Journal of Vacuum Science & Technology A Vacuum Surfaces and Films 14 (1): 56–62. https://doi.org/10.1116/1.579880.
Harvard
Sjöström, H. et al. (1996) ‘Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films’, Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 14(1), pp. 56–62. doi:10.1116/1.579880.
IEEE
H. Sjöström, L. Hultman, J. Sundgren, S. V. Hainsworth, T. F. Page, and G. Theunissen, “Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films,” Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, vol. 14, no. 1, pp. 56–62, 1996, doi: 10.1116/1.579880.
BibTeX
@article{sjostrom1996structural,
title = {{Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films}},
author = {Sjöström, H. and Hultman, Lars and Sundgren, J.‐E. and Hainsworth, S. V. and Page, T. F. and Theunissen, G.S.A.M.},
journal = {Journal of Vacuum Science \& Technology A Vacuum Surfaces and Films},
year = {1996},
volume = {14},
number = {1},
pages = {56--62},
doi = {10.1116/1.579880},
url = {https://doi.org/10.1116/1.579880}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2012 | 2 | |
| 2013 | 2 | |
| 2015 | 2 | |
| 2016 | 5 | |
| 2017 | 5 | |
| 2018 | 2 | |
| 2019 | 1 | |
| 2020 | 1 | |
| 2022 | 2 | |
| 2024 | 2 |
Its field-weighted citation impact is 46.47: it has been cited 46.47 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- carbon nitride films
- CNx films
- substrate temperature effects
- turbostratic structure
- diamond clusters
- nanoindentation
- hardness
- elastic recovery
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Sjöström, H., Hultman, L., Sundgren, J., Hainsworth, S. V., Page, T. F., & Theunissen, G. (1996). Structural and mechanical properties of carbon nitride CNx (0.2⩽x⩽0.35) films. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 14(1), 56–62. https://doi.org/10.1116/1.579880
How many times has this paper been cited?
232 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Durham Research Online (Durham University): sign in and open the full text from this page.
Who wrote this paper?
H. Sjöström, Lars Hultman, J.‐E. Sundgren, S. V. Hainsworth, T. F. Page, G.S.A.M. Theunissen.
What is the DOI of this paper?
10.1116/1.579880, permanently at https://doi.org/10.1116/1.579880. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.