Journal article · 2021 · Open access

Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process

Yuki Hirata, Ryotaro Takeuchi, Hiroyuki Taniguchi, Masao Kawagoe, Y. Iwamoto, Mikito Yoshizato, Hiroki Akasaka, Naoto Ohtake

Materials, 14(4), 719 · Published 3 February 2021 · DOI 10.3390/ma14040719

Open PDFView at the publisherCite this paper

In brief

“Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process” is a 2021 journal article by Yuki Hirata and 7 co-authors, published in Materials. OpenAlex counts 14 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.

Citations
14
Most cited in
2023 (5)
Field-weighted impact
0.79
References
58
Authors
8

Abstract

Amorphous boron carbon nitride (a-BCN) films exhibit excellent properties such as high hardness and high wear resistance. However, the correlation between the film structure and its mechanical properties is not fully understood. In this study, a-BCN films were prepared by an arc-sputtering hybrid process under various coating conditions, and the correlations between the film's structure and mechanical properties were clarified. Glow discharge optical emission spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy were used to analyze the structural properties and chemical composition. Nanoindentation and ball-on-disc tests were performed to evaluate the hardness and to estimate the friction coefficient and wear volume, respectively. The results indicated that the mechanical properties strongly depend on the carbon content in the film; it decreases significantly when the carbon content is <90%. On the other hand, by controlling the contents of boron and nitrogen to a very small amount (up to 2.5 at.%), it is possible to synthesize a film that has nearly the same hardness and friction coefficient as those of an amorphous carbon (a-C) film and better wear resistance than the a-C film.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hirata, Y., Takeuchi, R., Taniguchi, H., Kawagoe, M., Iwamoto, Y., Yoshizato, M., Akasaka, H., & Ohtake, N. (2021). Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process. Materials, 14(4), 719. https://doi.org/10.3390/ma14040719

MLA 9

Hirata, Yuki, et al. “Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process.” Materials, vol. 14, no. 4, 2021, p. 719. https://doi.org/10.3390/ma14040719.

Chicago

Hirata, Yuki, Ryotaro Takeuchi, Hiroyuki Taniguchi, Masao Kawagoe, Y. Iwamoto, Mikito Yoshizato, Hiroki Akasaka, and Naoto Ohtake. 2021. “Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process.” Materials 14 (4): 719. https://doi.org/10.3390/ma14040719.

Harvard

Hirata, Y. et al. (2021) ‘Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process’, Materials, 14(4), p. 719. doi:10.3390/ma14040719.

IEEE

Y. Hirata et al., “Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process,” Materials, vol. 14, no. 4, p. 719, 2021, doi: 10.3390/ma14040719.

BibTeX

@article{hirata2021structural,
  title     = {{Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process}},
  author    = {Hirata, Yuki and Takeuchi, Ryotaro and Taniguchi, Hiroyuki and Kawagoe, Masao and Iwamoto, Y. and Yoshizato, Mikito and Akasaka, Hiroki and Ohtake, Naoto},
  journal   = {Materials},
  year      = {2021},
  volume    = {14},
  number    = {4},
  pages     = {719},
  doi       = {10.3390/ma14040719},
  url       = {https://doi.org/10.3390/ma14040719}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202211
202355
202411
202544
202633

Its field-weighted citation impact is 0.79: it has been cited 0.79 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • carbon content
  • hardness
  • wear resistance
  • friction coefficient
  • structure-property relationships
  • amorphous carbon films
  • thin film coatings

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hirata, Y., Takeuchi, R., Taniguchi, H., Kawagoe, M., Iwamoto, Y., Yoshizato, M., Akasaka, H., & Ohtake, N. (2021). Structural and Mechanical Properties of a-BCN Films Prepared by an Arc-Sputtering Hybrid Process. Materials, 14(4), 719. https://doi.org/10.3390/ma14040719

How many times has this paper been cited?

14 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials: sign in and open the PDF from this page.

Who wrote this paper?

Yuki Hirata, Ryotaro Takeuchi, Hiroyuki Taniguchi, Masao Kawagoe, Y. Iwamoto, Mikito Yoshizato, Hiroki Akasaka, Naoto Ohtake.

What is the DOI of this paper?

10.3390/ma14040719, permanently at https://doi.org/10.3390/ma14040719. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.