Conference paper · 2017 · Open access

Strong dielectric-elastomer grippers with tension arch flexures

Kim Rui Heng, Anansa S. Ahmed, Milan Shrestha, Gih‐Keong Lau

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, 10163, 101631Z · Published 17 April 2017 · DOI 10.1117/12.2259926

Open PDFView at the publisherCite this paper

In brief

“Strong dielectric-elastomer grippers with tension arch flexures” is a 2017 conference paper by Kim Rui Heng and 3 co-authors, published in Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE. OpenAlex counts 20 citations as of 22 November 2026, which puts it in the top 8% of works published in 2017 by citations. It is open access: the full text is free to read at Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.

Citations
20
Most cited in
2023 (7)
Field-weighted impact
5.90
References
15
Authors
4

Abstract

Soft grippers based on dielectric elastomer actuator (DEA) are usually too flimsy to perform the task of pick and place on a heavier object given their low payload capacity. This work developed a new design of DEA unimorph consists of a flexible frame holding at a DEA on the discrete support by a stiffer spine-like flexure of 380μm thick Polyvinyl chloride (PVC) sheet. It finds an equilibrium of curling up when the DEA's pre-stretch is partially released; it can electrically unfolds upon a voltage application. This dielectric elastomer unimorph of 3 grams produced a maximum voltage induced bending of close to 90° and a maximum voltage-induced blocked force of up to 168mN. Given their higher stiffness and large actuation, these 3-D shaped and strengthened DEA unimorphs can make stronger grippers for passive grasping and active pinching.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Heng, K. R., Ahmed, A. S., Shrestha, M., & Lau, G. (2017). Strong dielectric-elastomer grippers with tension arch flexures. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, 10163, 101631Z. https://doi.org/10.1117/12.2259926

MLA 9

Heng, Kim Rui, et al. “Strong dielectric-elastomer grippers with tension arch flexures.” Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, vol. 10163, 2017, p. 101631Z. https://doi.org/10.1117/12.2259926.

Chicago

Heng, Kim Rui, Anansa S. Ahmed, Milan Shrestha, and Gih‐Keong Lau. 2017. “Strong dielectric-elastomer grippers with tension arch flexures.” Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 10163: 101631Z. https://doi.org/10.1117/12.2259926.

Harvard

Heng, K. R. et al. (2017) ‘Strong dielectric-elastomer grippers with tension arch flexures’, Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, 10163, p. 101631Z. doi:10.1117/12.2259926.

IEEE

K. R. Heng, A. S. Ahmed, M. Shrestha, and G. Lau, “Strong dielectric-elastomer grippers with tension arch flexures,” Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, vol. 10163, p. 101631Z, 2017, doi: 10.1117/12.2259926.

BibTeX

@inproceedings{heng2017strong,
  title     = {{Strong dielectric-elastomer grippers with tension arch flexures}},
  author    = {Heng, Kim Rui and Ahmed, Anansa S. and Shrestha, Milan and Lau, Gih‐Keong},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year      = {2017},
  volume    = {10163},
  pages     = {101631Z},
  doi       = {10.1117/12.2259926},
  url       = {https://doi.org/10.1117/12.2259926}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201922
202044
202133
202377
202422
202622

Its field-weighted citation impact is 5.90: it has been cited 5.90 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators

  • dielectric elastomer actuators
  • soft gripper
  • unimorph actuators
  • payload capacity
  • blocking force
  • pick-and-place
  • soft robotics

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Heng, K. R., Ahmed, A. S., Shrestha, M., & Lau, G. (2017). Strong dielectric-elastomer grippers with tension arch flexures. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE, 10163, 101631Z. https://doi.org/10.1117/12.2259926

How many times has this paper been cited?

20 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE: sign in and open the PDF from this page.

Who wrote this paper?

Kim Rui Heng, Anansa S. Ahmed, Milan Shrestha, Gih‐Keong Lau.

What is the DOI of this paper?

10.1117/12.2259926, permanently at https://doi.org/10.1117/12.2259926. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.