Journal article · 2022 · Open access
Steel desulfurization on RH degasser: physical and mathematical modeling
REM - International Engineering Journal, 75(1), 27–35 · Published 1 March 2022 · DOI 10.1590/0370-44672021750058
In brief
“Steel desulfurization on RH degasser: physical and mathematical modeling” is a 2022 journal article by Antonio Marlon Barros Silva and 3 co-authors, published in REM - International Engineering Journal. OpenAlex counts 5 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at REM - International Engineering Journal.
- Citations
- 5
- Most cited in
- 2025 (2)
- Field-weighted impact
- 0.43
- References
- 20
- Authors
- 4
Abstract
Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, respectively, was to assess the influence of density difference between the continuous and disperse phases on oil droplet behavior. It is shown that its flow tends to be more restricted near the down snorkel when the density difference increases. Moreover, these results provide the basis for CFD modeling validation, which enabled the determination of slag drop residence time inside steel on RH and the average value of the rate of dissipation of turbulent kinetic energy inside the RH ladle. These two parameters were used to develop a kinetic model, which reaches a good agreement with industrial trial results available in literature. The optimum desulfurization degree of 31.44% was achieved for a gas flow rate of 90 Nm3/h, according to the kinetic model. This value can be useful in some steel grade production, where the required S content is less than 10 ppm. Even in common steel grade production, if some punctual chemical adjustment is necessary, this technique is also useful. The main kinetic parameter for steel desulfurization is the steel circulation rate. For best results, it should be reduced in the desulfurization stage, and after that, the normal operation can be resumed, so that the production cycle is not affected.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Silva, A. M. B., Peixoto, J. J. M., da Silva, C. A., & Silva, I. A. (2022). Steel desulfurization on RH degasser: physical and mathematical modeling. REM - International Engineering Journal, 75(1), 27–35. https://doi.org/10.1590/0370-44672021750058
MLA 9
Silva, Antonio Marlon Barros, et al. “Steel desulfurization on RH degasser: physical and mathematical modeling.” REM - International Engineering Journal, vol. 75, no. 1, 2022, pp. 27–35. https://doi.org/10.1590/0370-44672021750058.
Chicago
Silva, Antonio Marlon Barros, Johne Jesus Mol Peixoto, Carlos Antônio da Silva, and Itavahn Alves Silva. 2022. “Steel desulfurization on RH degasser: physical and mathematical modeling.” REM - International Engineering Journal 75 (1): 27–35. https://doi.org/10.1590/0370-44672021750058.
Harvard
Silva, A. M. B. et al. (2022) ‘Steel desulfurization on RH degasser: physical and mathematical modeling’, REM - International Engineering Journal, 75(1), pp. 27–35. doi:10.1590/0370-44672021750058.
IEEE
A. M. B. Silva, J. J. M. Peixoto, C. A. da Silva, and I. A. Silva, “Steel desulfurization on RH degasser: physical and mathematical modeling,” REM - International Engineering Journal, vol. 75, no. 1, pp. 27–35, 2022, doi: 10.1590/0370-44672021750058.
BibTeX
@article{silva2022steel,
title = {{Steel desulfurization on RH degasser: physical and mathematical modeling}},
author = {Silva, Antonio Marlon Barros and Peixoto, Johne Jesus Mol and da Silva, Carlos Antônio and Silva, Itavahn Alves},
journal = {REM - International Engineering Journal},
year = {2022},
volume = {75},
number = {1},
pages = {27--35},
doi = {10.1590/0370-44672021750058},
url = {https://doi.org/10.1590/0370-44672021750058}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 1 | |
| 2023 | 1 | |
| 2024 | 1 | |
| 2025 | 2 |
Its field-weighted citation impact is 0.43: it has been cited 0.43 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- desulfurization kinetics
- density difference
- CFD validation
- turbulent kinetic energy dissipation
- gas flow rate
- reagent addition
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Silva, A. M. B., Peixoto, J. J. M., da Silva, C. A., & Silva, I. A. (2022). Steel desulfurization on RH degasser: physical and mathematical modeling. REM - International Engineering Journal, 75(1), 27–35. https://doi.org/10.1590/0370-44672021750058
How many times has this paper been cited?
5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at REM - International Engineering Journal: sign in and open the PDF from this page.
Who wrote this paper?
Antonio Marlon Barros Silva, Johne Jesus Mol Peixoto, Carlos Antônio da Silva, Itavahn Alves Silva.
What is the DOI of this paper?
10.1590/0370-44672021750058, permanently at https://doi.org/10.1590/0370-44672021750058. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.