Journal article · 2025 · Open access
Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer
Batteries & Supercaps, 8(12) · Published 11 July 2025 · DOI 10.1002/batt.202500386
In brief
“Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer” is a 2025 journal article by Songyi Han and 5 co-authors, published in Batteries & Supercaps. OpenAlex counts 2 citations as of 18 November 2026, which puts it in the top 5% of works published in 2025 by citations. It is open access: the full text is free to read at Batteries & Supercaps.
- Citations
- 2
- Most cited in
- 2026 (2)
- Field-weighted impact
- 0.39
- References
- 33
- Authors
- 6
Abstract
Na super‐ionic conductor (NASICON)‐structured solid electrolyte Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) excels in mechanical strength, ionic conductivity, and commercialization prospect, yet its incompatibility against Li metal anode typically leads to interfacial failure, significantly reducing the overall electrochemical performance of fabricated solid‐state Li metal batteries (SSLMBs). Here, this issue is tackled by interposing an in situ cured poly(ethylene oxide) (PEO)‐LiTFSI@BN interfacial layer between LATP and Li metal. This layer exhibits an ionic conductivity of 7.76 × 10 −5 S cm −1 at room temperature, robust thermostability, as well as satisfactory stability against Li metal (critical current density: 1.5 mA cm −2 ). A Li|LATP|Li symmetric cell employing the interfacial layer demonstrates long cyclic stability over 1200 cycles with a low overpotential of ± 100 mV. Furthermore, this interfacial layer enables a LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523)|LATP|Li metal SSLMB to sustain 120 cycles of operation at a cutoff voltage of 4.2 V. This work provides a practical strategy for integrating the LATP solid electrolyte into SSLMBs.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Han, S., Guo, H., Meng, A., Zhu, L., Tang, W., & Chen, J. (2025). Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer. Batteries & Supercaps, 8(12). https://doi.org/10.1002/batt.202500386
MLA 9
Han, Songyi, et al. “Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer.” Batteries & Supercaps, vol. 8, no. 12, 2025. https://doi.org/10.1002/batt.202500386.
Chicago
Han, Songyi, Hongyao Guo, Aiting Meng, Lei Zhu, Weiping Tang, and Junchao Chen. 2025. “Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer.” Batteries & Supercaps 8 (12). https://doi.org/10.1002/batt.202500386.
Harvard
Han, S. et al. (2025) ‘Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer’, Batteries & Supercaps, 8(12). doi:10.1002/batt.202500386.
IEEE
S. Han, H. Guo, A. Meng, L. Zhu, W. Tang, and J. Chen, “Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer,” Batteries & Supercaps, vol. 8, no. 12, 2025, doi: 10.1002/batt.202500386.
BibTeX
@article{han2025stabilizing,
title = {{Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer}},
author = {Han, Songyi and Guo, Hongyao and Meng, Aiting and Zhu, Lei and Tang, Weiping and Chen, Junchao},
journal = {Batteries \& Supercaps},
year = {2025},
volume = {8},
number = {12},
doi = {10.1002/batt.202500386},
url = {https://doi.org/10.1002/batt.202500386}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- solid-state lithium metal batteries
- LATP solid electrolyte
- NASICON
- poly(ethylene oxide)
- LiTFSI
- boron nitride
- interfacial layer
- lithium metal anode
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Han, S., Guo, H., Meng, A., Zhu, L., Tang, W., & Chen, J. (2025). Stabilizing Solid‐State Li Metal Batteries via a Poly(ethylene oxide)‐LiTFSI@Boron Nitride Interfacial Layer. Batteries & Supercaps, 8(12). https://doi.org/10.1002/batt.202500386
How many times has this paper been cited?
2 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Batteries & Supercaps: sign in and open the PDF from this page.
Who wrote this paper?
Songyi Han, Hongyao Guo, Aiting Meng, Lei Zhu, Weiping Tang, Junchao Chen.
What is the DOI of this paper?
10.1002/batt.202500386, permanently at https://doi.org/10.1002/batt.202500386. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.