Review article · 2023 · Open access
Soft Mechanosensing via 3D Printing: A review
Advanced Intelligent Systems, 5(6), 2200373 · Published 9 February 2023 · DOI 10.1002/aisy.202200373
In brief
“Soft Mechanosensing via 3D Printing: A review” is a 2023 review article by Diana Cafiso and 3 co-authors, published in Advanced Intelligent Systems. OpenAlex counts 31 citations as of 22 November 2026, which puts it in the top 8% of works published in 2023 by citations. It is open access under a CC BY licence: the full text is free to read at Advanced Intelligent Systems.
- Citations
- 31
- Most cited in
- 2026 (13)
- Field-weighted impact
- 0.58
- References
- 138
- Authors
- 4
Abstract
Recently, 3D printing, or additive manufacturing (AM), is emerging as a unique tool to fabricate soft mechanical sensors. Advanced performances can be obtained owing to the inherent 3D structures that enable enhanced and anisotropic deformations, to the multi‐material approach, and to the seamless fabrication procedure leading to higher reliability. Nevertheless, despite the remarkable advantages, the printing of soft and conductive materials shows consistent challenges. This review provides an extensive analysis of the current progress of 3D printing of soft mechanical sensors, which mainly rely on resistive and capacitive transduction. First, the most common materials used are described, like soft matrixes, conductive fillers, and polymers. Then, the 3D printers that are most widely adopted for the fabrication of soft sensors are identified, and the specific advantages and the difficulties of each technology are examined. Finally, by reporting exemplary case studies from the literature, an overview of the scientific progresses on this topic is provided. The unique advantages led by 3D printing are highlighted, in terms of multiple materials, the feasibility of achieving complex geometries, and the advanced and programmed sensors properties.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cafiso, D., Lantean, S., Pirri, C. F., & Beccai, L. (2023). Soft Mechanosensing via 3D Printing: A review. Advanced Intelligent Systems, 5(6), 2200373. https://doi.org/10.1002/aisy.202200373
MLA 9
Cafiso, Diana, et al. “Soft Mechanosensing via 3D Printing: A review.” Advanced Intelligent Systems, vol. 5, no. 6, 2023, p. 2200373. https://doi.org/10.1002/aisy.202200373.
Chicago
Cafiso, Diana, Simone Lantean, Candido Fabrizio Pirri, and Lucia Beccai. 2023. “Soft Mechanosensing via 3D Printing: A review.” Advanced Intelligent Systems 5 (6): 2200373. https://doi.org/10.1002/aisy.202200373.
Harvard
Cafiso, D. et al. (2023) ‘Soft Mechanosensing via 3D Printing: A review’, Advanced Intelligent Systems, 5(6), p. 2200373. doi:10.1002/aisy.202200373.
IEEE
D. Cafiso, S. Lantean, C. F. Pirri, and L. Beccai, “Soft Mechanosensing via 3D Printing: A review,” Advanced Intelligent Systems, vol. 5, no. 6, p. 2200373, 2023, doi: 10.1002/aisy.202200373.
BibTeX
@article{cafiso2023soft,
title = {{Soft Mechanosensing via 3D Printing: A review}},
author = {Cafiso, Diana and Lantean, Simone and Pirri, Candido Fabrizio and Beccai, Lucia},
journal = {Advanced Intelligent Systems},
year = {2023},
volume = {5},
number = {6},
pages = {2200373},
doi = {10.1002/aisy.202200373},
url = {https://doi.org/10.1002/aisy.202200373}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 2 | |
| 2024 | 6 | |
| 2025 | 10 | |
| 2026 | 13 |
Its field-weighted citation impact is 0.58: it has been cited 0.58 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- 3D printing
- capacitive transduction
- conductive fillers
- multi-material printing
- anisotropic deformation
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cafiso, D., Lantean, S., Pirri, C. F., & Beccai, L. (2023). Soft Mechanosensing via 3D Printing: A review. Advanced Intelligent Systems, 5(6), 2200373. https://doi.org/10.1002/aisy.202200373
How many times has this paper been cited?
31 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced Intelligent Systems: sign in and open the full text from this page.
Who wrote this paper?
Diana Cafiso, Simone Lantean, Candido Fabrizio Pirri, Lucia Beccai.
What is the DOI of this paper?
10.1002/aisy.202200373, permanently at https://doi.org/10.1002/aisy.202200373. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.