Conference paper · 2025 · Open access

Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers

Ellis Capp, Marco Pontin, Peter Walters, Perla Maiolino

IEEE International Conference on Soft Robotics (RoboSoft), 1–8 · Published 22 April 2025 · DOI 10.1109/robosoft63089.2025.11020895

Open PDFView at the publisherCite this paper

In brief

“Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers” is a 2025 conference paper by Ellis Capp and 3 co-authors, published in IEEE International Conference on Soft Robotics (RoboSoft). OpenAlex counts 7 citations as of 22 November 2026, which puts it in the top 8% of works published in 2025 by citations. It is open access: the full text is free to read at Oxford University Research Archive (ORA) (University of Oxford).

Citations
7
Most cited in
2026 (5)
Field-weighted impact
9.27
References
37
Authors
4

Abstract

Accurate shape sensing, only achievable through distributed proprioception, is a key requirement for closed-loop control of soft robots. Low-cost power efficient optoelectronic sensors manufactured from flexible materials represent a natural choice as they can cope with the large deformations of soft robots without loss of performance. However, existing integration approaches are cumbersome and require manual steps and complex assembly. We propose a semi-automated printing process where plastic optical fibers are embedded with readout electronics in 3D printed flexures. The fibers become locked in place and the readout electronics remain optically coupled to them while the flexures undergo large bending deformations, creating a repeatable, monolithically manufactured bending transducer with only 10 minutes required in total for the manual embedding steps. We demonstrate the process by manufacturing multi-material 3D printed fingers and extensively evaluating the performance of each proprioceptive joint. The sensors achieve 70% linearity and 4.81° RMS error on average. Furthermore, the distributed architecture allows for maintaining an average fingertip position estimation accuracy of 12 mm in the presence of external static forces. To demonstrate the potential of the distributed sensor architecture in robotics applications, we build a data-driven model independent of actuation feedback to detect contact with objects in the environment.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Capp, E., Pontin, M., Walters, P., & Maiolino, P. (2025). Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers. IEEE International Conference on Soft Robotics (RoboSoft), 1–8. https://doi.org/10.1109/robosoft63089.2025.11020895

MLA 9

Capp, Ellis, et al. “Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers.” IEEE International Conference on Soft Robotics (RoboSoft), 2025, pp. 1–8. https://doi.org/10.1109/robosoft63089.2025.11020895.

Chicago

Capp, Ellis, Marco Pontin, Peter Walters, and Perla Maiolino. 2025. “Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers.” IEEE International Conference on Soft Robotics (RoboSoft): 1–8. https://doi.org/10.1109/robosoft63089.2025.11020895.

Harvard

Capp, E. et al. (2025) ‘Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers’, IEEE International Conference on Soft Robotics (RoboSoft), pp. 1–8. doi:10.1109/robosoft63089.2025.11020895.

IEEE

E. Capp, M. Pontin, P. Walters, and P. Maiolino, “Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers,” IEEE International Conference on Soft Robotics (RoboSoft), pp. 1–8, 2025, doi: 10.1109/robosoft63089.2025.11020895.

BibTeX

@inproceedings{capp2025soft,
  title     = {{Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers}},
  author    = {Capp, Ellis and Pontin, Marco and Walters, Peter and Maiolino, Perla},
  booktitle = {IEEE International Conference on Soft Robotics (RoboSoft)},
  year      = {2025},
  pages     = {1--8},
  doi       = {10.1109/robosoft63089.2025.11020895},
  url       = {https://doi.org/10.1109/robosoft63089.2025.11020895}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • proprioception
  • soft robots
  • multi-material printing
  • embedded electronics
  • shape sensing
  • contact detection
  • optoelectronic sensors

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Capp, E., Pontin, M., Walters, P., & Maiolino, P. (2025). Soft and Highly-Integrated Optical Fiber Bending Sensors for Proprioception in Multi-Material 3D Printed Fingers. IEEE International Conference on Soft Robotics (RoboSoft), 1–8. https://doi.org/10.1109/robosoft63089.2025.11020895

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Oxford University Research Archive (ORA) (University of Oxford): sign in and open the PDF from this page.

Who wrote this paper?

Ellis Capp, Marco Pontin, Peter Walters, Perla Maiolino.

What is the DOI of this paper?

10.1109/robosoft63089.2025.11020895, permanently at https://doi.org/10.1109/robosoft63089.2025.11020895. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.