Journal article · 2018 · Open access

Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges

Linda Paternò, Michele Ibrahimi, Emanuele Gruppioni, Arianna Menciassi, Leonardo Ricotti

IEEE Transactions on Biomedical Engineering, 65(9), 1996–2010 · Published 23 January 2018 · DOI 10.1109/tbme.2017.2775100

Open PDFCite this paper

In brief

“Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges” is a 2018 journal article by Linda Paternò and 4 co-authors, published in IEEE Transactions on Biomedical Engineering. OpenAlex counts 668 citations as of 22 November 2026, which puts it in the top 2% of works published in 2018 by citations. It is open access: the full text is free to read at IEEE Transactions on Biomedical Engineering.

Citations
668
Most cited in
2025 (54)
Field-weighted impact
12.68
References
127
Authors
5

Abstract

In the prosthetics field, one of the most important bottlenecks is still the human-machine interface, namely the socket. Indeed, a large number of amputees still rejects prostheses or points out a low satisfaction level, due to a sub-optimal interaction between the socket and the residual limb tissues. The aim of this paper is to describe the main parameters (displacements, stress, volume fluctuations and temperature) affecting the stump-socket interface and reducing the comfort/stability of limb prostheses. In this review, a classification of the different socket types proposed in the literature is reported, together with an analysis of advantages and disadvantages of the different solutions, from multiple viewpoints. The paper then describes the technological solutions available to face an altered distribution of stresses on the residual limb tissues, volume fluctuations affecting the stump overtime and temperature variations affecting the residual tissues within the socket. The open challenges in this research field are highlighted and the possible future routes are discussed, towards the ambitious objective of achieving an advanced socket able to self-adapt in real-time to the complex interplay of factors affecting the stump, during both static and dynamic tasks.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Paternò, L., Ibrahimi, M., Gruppioni, E., Menciassi, A., & Ricotti, L. (2018). Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges. IEEE Transactions on Biomedical Engineering, 65(9), 1996–2010. https://doi.org/10.1109/tbme.2017.2775100

MLA 9

Paternò, Linda, et al. “Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges.” IEEE Transactions on Biomedical Engineering, vol. 65, no. 9, 2018, pp. 1996–2010. https://doi.org/10.1109/tbme.2017.2775100.

Chicago

Paternò, Linda, Michele Ibrahimi, Emanuele Gruppioni, Arianna Menciassi, and Leonardo Ricotti. 2018. “Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges.” IEEE Transactions on Biomedical Engineering 65 (9): 1996–2010. https://doi.org/10.1109/tbme.2017.2775100.

Harvard

Paternò, L. et al. (2018) ‘Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges’, IEEE Transactions on Biomedical Engineering, 65(9), pp. 1996–2010. doi:10.1109/tbme.2017.2775100.

IEEE

L. Paternò, M. Ibrahimi, E. Gruppioni, A. Menciassi, and L. Ricotti, “Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges,” IEEE Transactions on Biomedical Engineering, vol. 65, no. 9, pp. 1996–2010, 2018, doi: 10.1109/tbme.2017.2775100.

BibTeX

@article{paterno2018sockets,
  title     = {{Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges}},
  author    = {Paternò, Linda and Ibrahimi, Michele and Gruppioni, Emanuele and Menciassi, Arianna and Ricotti, Leonardo},
  journal   = {IEEE Transactions on Biomedical Engineering},
  year      = {2018},
  volume    = {65},
  number    = {9},
  pages     = {1996--2010},
  doi       = {10.1109/tbme.2017.2775100},
  url       = {https://doi.org/10.1109/tbme.2017.2775100}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20173434
20183636
20193838
20203434
20214646
20224141
20235151
20244646
20255454
20264848

Its field-weighted citation impact is 12.68: it has been cited 12.68 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics

  • prosthetic socket
  • artificial limbs
  • human-machine interaction
  • residual limb
  • pressure distribution
  • volume fluctuations
  • temperature variation
  • socket comfort

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Paternò, L., Ibrahimi, M., Gruppioni, E., Menciassi, A., & Ricotti, L. (2018). Sockets for Limb Prostheses: A Review of Existing Technologies and Open Challenges. IEEE Transactions on Biomedical Engineering, 65(9), 1996–2010. https://doi.org/10.1109/tbme.2017.2775100

How many times has this paper been cited?

668 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at IEEE Transactions on Biomedical Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Linda Paternò, Michele Ibrahimi, Emanuele Gruppioni, Arianna Menciassi, Leonardo Ricotti.

What is the DOI of this paper?

10.1109/tbme.2017.2775100, permanently at https://doi.org/10.1109/tbme.2017.2775100. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.