Paper · 2017 · Open access

Shape memory polymers as direct contact dry adhesives for transfer printing and general use

Jeffrey D. Eisenhaure

Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Published 9 October 2017

Open PDFView at the publisherCite this paper

In brief

“Shape memory polymers as direct contact dry adhesives for transfer printing and general use” is a 2017 paper by Jeffrey D. Eisenhaure, published in Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign).

Citations
1
Most cited in
2021 (1)
References
223
Authors
1

Abstract

For most diminutive life on Earth, control over external adhesive forces is crucial for survival. As humans, we pay little notice because at our scale inertial forces typically overwhelm adhesive forces by a wide margin. Nonetheless, the study and development of dry adhesives, which rely on ubiquitous intermolecular attractions to repeatedly form and break attachment to their adherends, have garnered substantial interest in recent decades. High performance artificial dry adhesives may unlock the door for many exciting new technologies from nanoscale manufacturing to wall climbing robots, but thus far the challenges have proven substantial and few successful commercial applications have come to fruition. This dissertation represents an initial investigation into the benefits and potential limitations of developing shape memory polymer (SMP)-based dry adhesives. Prior to the presentation of experimental results, a review of the current state of dry adhesive knowledge including both theory, observations of the natural world, and lessons learned by other researchers in their attempts to develop a wide variety of synthetic dry adhesives is provided. It is concluded that dry adhesives fundamentally function through careful control of elastic energy, an idea that is very well suited to explore using SMPs which offer a large change in compliance across their thermal transition temperature. Thermoset epoxy SMPs are identified as an ideal choice for the investigation due to their mechanical strength, chemical resistance, manufacturability and convenient glass transitions among other features. The dry adhesive performance of a selected SMP is first evaluated for the purpose of microscale transfer printing, wherein micro-objects are assembled through precise control of adhesive surface forces. Significant benefits over existing solutions in terms of maximum adhesive strength during loading (~7 MPa), minimum strength for release (~0 MPa), and process versatility are confirmed, culminating in demonstrations of several challenging assemblies. The increase in adhesive strength is explained by invoking arguments from linear fracture mechanics and considering the dramatic compliance change experienced by the SMP between bond and load events. Advanced methods of heating and meaningful steps towards commercial-scale parallel printing processes are demonstrated. The suitability of SMP for larger-scale applications is considered next. Strength rivaling or exceeding known alternatives is demonstrated, showing adhesion exceeding 2 MPa for 6 mm diameter adhesives while retaining excellent releasability through the use of microstructuring. A method of internally heating the SMP by adding conductive carbon nanoparticles is explored, including quantitative analyses of conductivity and the SMP composite's storage and loss moduli. The resulting flexible and conductive bi-layer SMP adhesive supports load while attached to surfaces of varied curvature. Variations on…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Eisenhaure, J. D. (2017). Shape memory polymers as direct contact dry adhesives for transfer printing and general use. Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign). https://hdl.handle.net/2142/99291

MLA 9

Eisenhaure, Jeffrey D. “Shape memory polymers as direct contact dry adhesives for transfer printing and general use.” Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign), 2017. https://hdl.handle.net/2142/99291.

Chicago

Eisenhaure, Jeffrey D. 2017. “Shape memory polymers as direct contact dry adhesives for transfer printing and general use.” Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign). https://hdl.handle.net/2142/99291.

Harvard

Eisenhaure, J. D. (2017) ‘Shape memory polymers as direct contact dry adhesives for transfer printing and general use’, Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign). Available at: https://hdl.handle.net/2142/99291.

IEEE

J. D. Eisenhaure, “Shape memory polymers as direct contact dry adhesives for transfer printing and general use,” Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign), 2017.

BibTeX

@article{eisenhaure2017shape,
  title     = {{Shape memory polymers as direct contact dry adhesives for transfer printing and general use}},
  author    = {Eisenhaure, Jeffrey D.},
  journal   = {Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign)},
  year      = {2017},
  url       = {https://hdl.handle.net/2142/99291}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions

  • shape memory polymers
  • dry adhesives
  • transfer printing
  • epoxy thermosets
  • glass transition
  • compliance change
  • linear elastic fracture mechanics
  • adhesion strength

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Eisenhaure, J. D. (2017). Shape memory polymers as direct contact dry adhesives for transfer printing and general use. Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign). https://hdl.handle.net/2142/99291

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign): sign in and open the PDF from this page.

Who wrote this paper?

Jeffrey D. Eisenhaure.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.