Journal article · 2021 · Open access
Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy
Materials, 14(2), 255 · Published 6 January 2021 · DOI 10.3390/ma14020255
In brief
“Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy” is a 2021 journal article by Dohyung Kim and 4 co-authors, published in Materials. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.
- Citations
- 6
- Most cited in
- 2023 (2)
- Field-weighted impact
- 0.20
- References
- 22
- Authors
- 5
Abstract
In the present study, the shape, memory, and mechanical properties of cold-rolled and annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C (wt.%) alloy were investigated. The cold-rolled alloy was annealing heat-treated at different temperatures in the range of 500-900 °C for 30 min. The shape recovery behavior of the alloy was investigated using strip bending test followed by recovery heating. The microstructural evolution and the stress-strain response of the alloy heat-treated at different temperatures revealed that the recovery took place at a heat-treatment temperature higher than 600 °C. Recrystallization occurred when the heat-treatment temperature was higher than 800 °C. Meaningful shape recovery was observed only when the alloy was annealed at temperatures higher than 600 °C. The highest recovery strain of up to 2.56% was achieved with a pre-strain of 5.26% and recovery heating temperature of 400 °C, when the alloy was heat-treated at 700 °C. Conversely, the yield strength reduced significantly with increasing annealing heat-treatment temperature. The experimental observations presented in this paper provide a guideline for post-annealing heat-treatment when a good compromise between mechanical property and shape recovery performance is required.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kim, D., Hong, K.-N., Sim, J., Lee, J., & Lee, W. (2021). Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy. Materials, 14(2), 255. https://doi.org/10.3390/ma14020255
MLA 9
Kim, Dohyung, et al. “Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy.” Materials, vol. 14, no. 2, 2021, p. 255. https://doi.org/10.3390/ma14020255.
Chicago
Kim, Dohyung, Ki-Nam Hong, Jeesoo Sim, Junghoon Lee, and Wookjin Lee. 2021. “Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy.” Materials 14 (2): 255. https://doi.org/10.3390/ma14020255.
Harvard
Kim, D. et al. (2021) ‘Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy’, Materials, 14(2), p. 255. doi:10.3390/ma14020255.
IEEE
D. Kim, K.-N. Hong, J. Sim, J. Lee, and W. Lee, “Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy,” Materials, vol. 14, no. 2, p. 255, 2021, doi: 10.3390/ma14020255.
BibTeX
@article{kim2021shape,
title = {{Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy}},
author = {Kim, Dohyung and Hong, Ki-Nam and Sim, Jeesoo and Lee, Junghoon and Lee, Wookjin},
journal = {Materials},
year = {2021},
volume = {14},
number = {2},
pages = {255},
doi = {10.3390/ma14020255},
url = {https://doi.org/10.3390/ma14020255}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 2 | |
| 2024 | 1 | |
| 2025 | 1 | |
| 2026 | 2 |
Its field-weighted citation impact is 0.20: it has been cited 0.20 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- shape memory effect
- cold rolling
- annealing
- shape recovery
- recovery strain
- recrystallization
- microstructure evolution
- yield strength
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Kim, D., Hong, K.-N., Sim, J., Lee, J., & Lee, W. (2021). Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy. Materials, 14(2), 255. https://doi.org/10.3390/ma14020255
How many times has this paper been cited?
6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials: sign in and open the PDF from this page.
Who wrote this paper?
Dohyung Kim, Ki-Nam Hong, Jeesoo Sim, Junghoon Lee, Wookjin Lee.
What is the DOI of this paper?
10.3390/ma14020255, permanently at https://doi.org/10.3390/ma14020255. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.