Dissertation · 2012 · Open access

Shape memory Alloy Actuator for cross-feed in turning operation

Timothy Otieno

Nelson Mandela University Research Repository · Published 1 January 2012

Open PDFView at the publisherCite this paper

In brief

“Shape memory Alloy Actuator for cross-feed in turning operation” is a 2012 dissertation by Timothy Otieno, published in Nelson Mandela University Research Repository. OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at Nelson Mandela University Research Repository.

Citations
1
Most cited in
2024 (1)
References
29
Authors
1

Abstract

A shape memory alloy (SMA) is an intermetallic compound able to recover, in a continuous and reversible way, a predetermined shape during a thermal cycle while generating mechanical work. In this thesis, its use in developing an actuator for a machining process is investigated. The actuator is to drive the tool cross feed into an aluminium workpiece in a finishing lathe operation. The actuator structure was designed with an output shaft to transfer the movement and force of the SMA wire outside the device. The actuator was fabricated and the experimental setup was assembled which also included a power supply control circuit, displacement sensor, temperature sensor and current sensor for feedback, and data collection and monitoring within software. PID control was implemented within the software that regulated the power supplied to the SMA, thereby providing the position control. This study covers the mechatronics system design and development of the actuator, the experiments carried out to determine performance and the results. Open loop tests were conducted to determine the maximum stroke, the effect of cooling and response to radial forces. These tests revealed the expected non-linearity of the SMA. The actuator achieved the rated maximum stroke of 3-4 percent. The forced cooling test showed a general improvement of approximately 65 percent with fans. The radial force tests showed the value of the maximum stroke remained unaffected by force. The results from the closed loop tests responses with a tuned PID controller produced a stable system for various displacement setpoints. The actuator had a feed rate of 0.25 mm/s and an accuracy of 0.0153mm, which was within the acceptable accuracy for turning operations. The system was deemed accurate for a conventional lathe machine cross feed.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Otieno, T. (2012). Shape memory Alloy Actuator for cross-feed in turning operation. Nelson Mandela University Research Repository. https://hdl.handle.net/10948/2015303

MLA 9

Otieno, Timothy. “Shape memory Alloy Actuator for cross-feed in turning operation.” Nelson Mandela University Research Repository, 2012. https://hdl.handle.net/10948/2015303.

Chicago

Otieno, Timothy. 2012. “Shape memory Alloy Actuator for cross-feed in turning operation.” Nelson Mandela University Research Repository. https://hdl.handle.net/10948/2015303.

Harvard

Otieno, T. (2012) ‘Shape memory Alloy Actuator for cross-feed in turning operation’, Nelson Mandela University Research Repository. Available at: https://hdl.handle.net/10948/2015303.

IEEE

T. Otieno, “Shape memory Alloy Actuator for cross-feed in turning operation,” Nelson Mandela University Research Repository, 2012.

BibTeX

@phdthesis{otieno2012shape,
  title     = {{Shape memory Alloy Actuator for cross-feed in turning operation}},
  author    = {Otieno, Timothy},
  year      = {2012},
  url       = {https://hdl.handle.net/10948/2015303}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloys
  • shape memory alloy actuators
  • turning
  • lathe
  • PID control
  • position control
  • forced cooling
  • radial force

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Otieno, T. (2012). Shape memory Alloy Actuator for cross-feed in turning operation. Nelson Mandela University Research Repository. https://hdl.handle.net/10948/2015303

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Nelson Mandela University Research Repository: sign in and open the PDF from this page.

Who wrote this paper?

Timothy Otieno.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.