Paper · 2017 · Open access

Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults

Hamid Saffari, Mohammad Hossein Pouladvand

DOAJ (DOAJ: Directory of Open Access Journals), 4(3) · Published 1 November 2017 · DOI 10.22065/jsce.2017.79793.1112

Open full textView at the publisherCite this paper

In brief

“Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults” is a 2017 paper by Hamid Saffari and Mohammad Hossein Pouladvand, published in DOAJ (DOAJ: Directory of Open Access Journals). OpenAlex counts 8 citations as of 21 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).

Citations
8
Most cited in
2024 (2)
Field-weighted impact
0.23
Authors
2

Abstract

Tehran has situated over several active faults such as Mosha, North Tehran, North Ray and South Ray faults and has experienced strong earthquakes in its history. It is possible the same earthquake occurs and result to large damages and many casualties. In this paper, seismic hazard analysis of Tehran city has been done with deterministic seismic hazard analysis, using specification of Tehran scenario active faults, soil conditions, average shear wave velocity extracted from several researches on Tehran area. To do this, a credible attenuation relation which considers effects of near source that has appropriate adaptation with Iran records has been used. In the following, deterministic seismic hazard analysis considering earthquake at closest distance to each mesh was done. Then, seismic output such as PGA, PGV, PGD and SA for all meshes of Tehran and their soil condition was done for each fault scenario. Then, maximum of seismic index was calculated for each and all scenarios on GIS and the results were evaluated. One of the main results of this article is calculation of seismic indexes near faults, so spectral acceleration near to North Tehran or Ray Faults with soil types I, II and III predicted as 1.2, 1.5 and 2g corresponding to predominant period of short buildings and it means high damages on areas over or near faults.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Saffari, H., & Pouladvand, M. H. (2017). Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults. DOAJ (DOAJ: Directory of Open Access Journals), 4(3). https://doi.org/10.22065/jsce.2017.79793.1112

MLA 9

Saffari, Hamid, and Mohammad Hossein Pouladvand. “Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults.” DOAJ (DOAJ: Directory of Open Access Journals), vol. 4, no. 3, 2017. https://doi.org/10.22065/jsce.2017.79793.1112.

Chicago

Saffari, Hamid and Mohammad Hossein Pouladvand. 2017. “Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults.” DOAJ (DOAJ: Directory of Open Access Journals) 4 (3). https://doi.org/10.22065/jsce.2017.79793.1112.

Harvard

Saffari, H. and Pouladvand, M. H. (2017) ‘Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults’, DOAJ (DOAJ: Directory of Open Access Journals), 4(3). doi:10.22065/jsce.2017.79793.1112.

IEEE

H. Saffari and M. H. Pouladvand, “Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults,” DOAJ (DOAJ: Directory of Open Access Journals), vol. 4, no. 3, 2017, doi: 10.22065/jsce.2017.79793.1112.

BibTeX

@article{saffari2017seismic,
  title     = {{Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults}},
  author    = {Saffari, Hamid and Pouladvand, Mohammad Hossein},
  journal   = {DOAJ (DOAJ: Directory of Open Access Journals)},
  year      = {2017},
  volume    = {4},
  number    = {3},
  doi       = {10.22065/jsce.2017.79793.1112},
  url       = {https://doi.org/10.22065/jsce.2017.79793.1112}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202111
202211
202422
202522
202611

Its field-weighted citation impact is 0.23: it has been cited 0.23 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Seismic Performance and Analysis

  • seismic microzonation
  • deterministic seismic hazard analysis
  • Tehran
  • active faults
  • soil conditions
  • shear wave velocity
  • ground motion prediction
  • near-source effects

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Saffari, H., & Pouladvand, M. H. (2017). Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults. DOAJ (DOAJ: Directory of Open Access Journals), 4(3). https://doi.org/10.22065/jsce.2017.79793.1112

How many times has this paper been cited?

8 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.

Who wrote this paper?

Hamid Saffari, Mohammad Hossein Pouladvand.

What is the DOI of this paper?

10.22065/jsce.2017.79793.1112, permanently at https://doi.org/10.22065/jsce.2017.79793.1112. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.