Journal article · 2011 · Open access

S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film

Hiroatsu ODA, Hikaru NODA, Daisuke Yonekura, Ri-ichi Murakami

The Proceedings of Mechanical Engineering Congress Japan, 2011(0), _S043014–1 · Published 1 January 2011 · DOI 10.1299/jsmemecj.2011._s043014-1

Open PDFView at the publisherCite this paper

In brief

“S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film” is a 2011 journal article by Hiroatsu ODA and 3 co-authors, published in The Proceedings of Mechanical Engineering Congress Japan. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at The Proceedings of Mechanical Engineering Congress Japan.

Citations
0
Authors
4

Abstract

In this study, influence of substrate material and ion bombardment pretreatment on adhesion of CrN film is examined on the basis of surface free energy measurement. Four materials: pure aluminum alloy, super duralumin, high-speed tool steel, and pure titanium alloy are used as substrates. Before CrN deposition, ion bombardment pretreatment is performed in order to remove surface contamination. Ion bombardment process is carried out in nitrogen or argon atmosphere under various gas flow rate. Surface free energy is measured by sessile drop method using distilled water and methylene iodide. Critical load of CrN film is examined using the scratch tester. The influence of venting after ion bombardment process on the critical load is also examined. As a result, surface free energy, especially polar component, decreased after ion bombardment process. Critical load decreased with increasing the polar component of surface free energy. The critical load increases with decreasing the polar component of surface free energy, in particular, SKH-2 substrate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

ODA, H., NODA, H., Yonekura, D., & Murakami, R.-I. (2011). S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film. The Proceedings of Mechanical Engineering Congress Japan, 2011(0), _S043014–1. https://doi.org/10.1299/jsmemecj.2011._s043014-1

MLA 9

ODA, Hiroatsu, et al. “S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film.” The Proceedings of Mechanical Engineering Congress Japan, vol. 2011, no. 0, 2011, pp. _S043014–1. https://doi.org/10.1299/jsmemecj.2011._s043014-1.

Chicago

ODA, Hiroatsu, Hikaru NODA, Daisuke Yonekura, and Ri-ichi Murakami. 2011. “S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film.” The Proceedings of Mechanical Engineering Congress Japan 2011 (0): _S043014–1. https://doi.org/10.1299/jsmemecj.2011._s043014-1.

Harvard

ODA, H. et al. (2011) ‘S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film’, The Proceedings of Mechanical Engineering Congress Japan, 2011(0), pp. _S043014–1. doi:10.1299/jsmemecj.2011._s043014-1.

IEEE

H. ODA, H. NODA, D. Yonekura, and R.-I. Murakami, “S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film,” The Proceedings of Mechanical Engineering Congress Japan, vol. 2011, no. 0, pp. _S043014–1, 2011, doi: 10.1299/jsmemecj.2011._s043014-1.

BibTeX

@article{oda2011influence,
  title     = {{S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film}},
  author    = {ODA, Hiroatsu and NODA, Hikaru and Yonekura, Daisuke and Murakami, Ri-ichi},
  journal   = {The Proceedings of Mechanical Engineering Congress Japan},
  year      = {2011},
  volume    = {2011},
  number    = {0},
  pages     = {_S043014--1},
  doi       = {10.1299/jsmemecj.2011._s043014-1},
  url       = {https://doi.org/10.1299/jsmemecj.2011._s043014-1}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • chromium nitride thin films
  • film adhesion
  • surface energy
  • substrate materials
  • aluminum alloys
  • high-speed steel
  • titanium alloys
  • critical load

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

ODA, H., NODA, H., Yonekura, D., & Murakami, R.-I. (2011). S043014 Influence of pretreatment and substrate materials on adhesion of CrN thin film. The Proceedings of Mechanical Engineering Congress Japan, 2011(0), _S043014–1. https://doi.org/10.1299/jsmemecj.2011._s043014-1

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at The Proceedings of Mechanical Engineering Congress Japan: sign in and open the PDF from this page.

Who wrote this paper?

Hiroatsu ODA, Hikaru NODA, Daisuke Yonekura, Ri-ichi Murakami.

What is the DOI of this paper?

10.1299/jsmemecj.2011._s043014-1, permanently at https://doi.org/10.1299/jsmemecj.2011._s043014-1. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.