Journal article · 2020 · Open access

Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering

Filipe Fernandes, A. AL-Rjoub, Diogo Cavaleiro, Tomáš Polcar, A. Cavaleiro

Coatings, 10(12), 1191 · Published 6 December 2020 · DOI 10.3390/coatings10121191

Open PDFView at the publisherCite this paper

In brief

“Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering” is a 2020 journal article by Filipe Fernandes and 4 co-authors, published in Coatings. OpenAlex counts 19 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.

Citations
19
Most cited in
2022 (5)
Field-weighted impact
1.30
References
29
Authors
5

Abstract

In this study, we compare the tribological performance of a multilayer TiSiN/Ti(Ag)N coating with a TiSiN/TiN coating with a similar Si content in order to demonstrate the effect of the solid lubricant phase, silver. For Al2O3 balls, the hardness and reduced modulus determine the tribological performance of the coatings for tests conducted at room temperature (RT) against Al2O3 balls. At 550 °C, the TiSiN/TiN coating failed, whereas the Ag-containing coating performed better due to the presence of Ag in the contact, which decreased the shear stress and, consequently, the friction. For tests against TiAl6V4 balls, the Ag-containing coating was always better than the TiSiN/TiN one. At 550 °C, Ag in the wear track prevented the adhesion of the oxidized Ti-alloy wear debris in the contact, favoring the adhesion of wear debris from the coating to both the coating and counterpart surfaces. No wear could be measured for the 700 °C tests for both coatings due to different reasons: (i) the presence of oxidized adhered material from the ball to the reference TiSiN/TiN coating surface protected from wear and (ii) the presence of Ag-agglomerated particles decreased the friction and minimized the adhesion wear of the counterpart for the TiSiN/TiN(Ag) coating.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fernandes, F., AL-Rjoub, A., Cavaleiro, D., Polcar, T., & Cavaleiro, A. (2020). Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering. Coatings, 10(12), 1191. https://doi.org/10.3390/coatings10121191

MLA 9

Fernandes, Filipe, et al. “Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering.” Coatings, vol. 10, no. 12, 2020, p. 1191. https://doi.org/10.3390/coatings10121191.

Chicago

Fernandes, Filipe, A. AL-Rjoub, Diogo Cavaleiro, Tomáš Polcar, and A. Cavaleiro. 2020. “Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering.” Coatings 10 (12): 1191. https://doi.org/10.3390/coatings10121191.

Harvard

Fernandes, F. et al. (2020) ‘Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering’, Coatings, 10(12), p. 1191. doi:10.3390/coatings10121191.

IEEE

F. Fernandes, A. AL-Rjoub, D. Cavaleiro, T. Polcar, and A. Cavaleiro, “Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering,” Coatings, vol. 10, no. 12, p. 1191, 2020, doi: 10.3390/coatings10121191.

BibTeX

@article{fernandes2020room,
  title     = {{Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering}},
  author    = {Fernandes, Filipe and AL-Rjoub, A. and Cavaleiro, Diogo and Polcar, Tomáš and Cavaleiro, A.},
  journal   = {Coatings},
  year      = {2020},
  volume    = {10},
  number    = {12},
  pages     = {1191},
  doi       = {10.3390/coatings10121191},
  url       = {https://doi.org/10.3390/coatings10121191}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202144
202255
202322
202455
202511
202622

Its field-weighted citation impact is 1.30: it has been cited 1.30 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • solid lubrication
  • high-temperature tribology
  • sputtered thin films
  • reduced modulus
  • hardness
  • friction
  • wear resistance

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Fernandes, F., AL-Rjoub, A., Cavaleiro, D., Polcar, T., & Cavaleiro, A. (2020). Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering. Coatings, 10(12), 1191. https://doi.org/10.3390/coatings10121191

How many times has this paper been cited?

19 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Coatings: sign in and open the PDF from this page.

Who wrote this paper?

Filipe Fernandes, A. AL-Rjoub, Diogo Cavaleiro, Tomáš Polcar, A. Cavaleiro.

What is the DOI of this paper?

10.3390/coatings10121191, permanently at https://doi.org/10.3390/coatings10121191. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.