Journal article · 2007 · Open access

Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry

V. Weiß, S. Seeger, K. Ellmer, Rainald Mientus

Journal of Applied Physics, 101(10) · Published 15 May 2007 · DOI 10.1063/1.2716395

Open PDFView at the publisherCite this paper

In brief

“Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry” is a 2007 journal article by V. Weiß and 3 co-authors, published in Journal of Applied Physics. OpenAlex counts 45 citations as of 20 November 2026. It is open access: the full text is free to read at Journal of Applied Physics.

Citations
45
Most cited in
2026 (6)
Field-weighted impact
1.68
References
45
Authors
4

Abstract

Tungsten disulfide (WS2−x) films (0.07⩽x⩽0.7) were prepared by reactive magnetron sputtering from a tungsten target in rare gas/H2S atmospheres and at substrate temperatures up to 620°C. The nucleation and growth of the films were investigated by in situ energy dispersive x-ray diffraction (EDXRD) and by ex situ techniques such as electron microscopy, elastic recoil detection analysis, and x-ray reflectivity. From the EDXRD analysis it was found that the films always nucleate with the (001) planes, i.e., the van der Waals planes, parallel to the substrate surface. For high deposition rates and/or low substrate temperatures a texture crossover from the (001) to the (100) crystallite orientation occurs during the growth. High deposition rates, low substrate temperatures, or low sputtering pressures lead to a significant lattice expansion of the crystallites in the c direction (up to 3%). This is most probably caused by a disturbed or turbostratic film growth induced by the energetic bombardment during film deposition. Reflected and neutralized energetic ions (Ar0,S0) from the tungsten target and negative ions (S−) accelerated in the cathode dark space constitute the main sources of the energetic bombardment leading to crystallographic defects. The energy of these particles can be tailored by (i) thermalization between target and substrate in the sputtering gas or (ii) by a reduction of the discharge or target voltage, respectively, by high frequency excitation of the plasma. Films deposited under favorable conditions with respect to low particle energies and at substrate temperatures higher than 200°C exhibit a significant sulfur deficiency of up to about 5at.% compared to the stoichiometric composition of WS2. This is ascribed to an energetic particle bombardment-induced sulfur desorption from the growing films.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Weiß, V., Seeger, S., Ellmer, K., & Mientus, R. (2007). Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry. Journal of Applied Physics, 101(10). https://doi.org/10.1063/1.2716395

MLA 9

Weiß, V., et al. “Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry.” Journal of Applied Physics, vol. 101, no. 10, 2007. https://doi.org/10.1063/1.2716395.

Chicago

Weiß, V., S. Seeger, K. Ellmer, and Rainald Mientus. 2007. “Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry.” Journal of Applied Physics 101 (10). https://doi.org/10.1063/1.2716395.

Harvard

Weiß, V. et al. (2007) ‘Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry’, Journal of Applied Physics, 101(10). doi:10.1063/1.2716395.

IEEE

V. Weiß, S. Seeger, K. Ellmer, and R. Mientus, “Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry,” Journal of Applied Physics, vol. 101, no. 10, 2007, doi: 10.1063/1.2716395.

BibTeX

@article{wei2007reactive,
  title     = {{Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry}},
  author    = {Weiß, V. and Seeger, S. and Ellmer, K. and Mientus, Rainald},
  journal   = {Journal of Applied Physics},
  year      = {2007},
  volume    = {101},
  number    = {10},
  doi       = {10.1063/1.2716395},
  url       = {https://doi.org/10.1063/1.2716395}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201644
201733
201844
201933
202044
202122
202233
202322
202411
202666

Its field-weighted citation impact is 1.68: it has been cited 1.68 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • tungsten disulfide
  • reactive magnetron sputtering
  • film texture
  • crystallite orientation
  • lattice expansion
  • energetic ion bombardment
  • sulfur desorption
  • stoichiometry

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Weiß, V., Seeger, S., Ellmer, K., & Mientus, R. (2007). Reactive magnetron sputtering of tungsten disulfide (WS2−x) films: Influence of deposition parameters on texture, microstructure, and stoichiometry. Journal of Applied Physics, 101(10). https://doi.org/10.1063/1.2716395

How many times has this paper been cited?

45 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Applied Physics: sign in and open the PDF from this page.

Who wrote this paper?

V. Weiß, S. Seeger, K. Ellmer, Rainald Mientus.

What is the DOI of this paper?

10.1063/1.2716395, permanently at https://doi.org/10.1063/1.2716395. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.