Journal article · 2024 · Open access

PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO

João Roberto Sartori Moreno, Alisson Caetano Neves, Celso Alves Corrêa, Janaina Fracaro Souza Gonçalves

Revista SODEBRAS, 1(Especial) · Published 21 May 2024 · DOI 10.29367/pbg2z894

Open PDFView at the publisherCite this paper

In brief

“PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO” is a 2024 journal article by João Roberto Sartori Moreno and 3 co-authors, published in Revista SODEBRAS. OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Revista SODEBRAS.

Citations
0
References
16
Authors
4

Abstract

Este estudo propõe a análise estatística de soldas de revestimento utilizando processo de soldagem com arame tubular e corrente contínua pulsada (P-FCAW), com análise de variância para analisar a eficácia de modelo de regressão de primeira ordem e relacionar os valores obtidos de corrente média, tensão média, potência média, largura e reforço. Corpos de prova de aço SAE 1020 foram usados para receber cordões de revestimento de arame metálico tubular em inoxidável martensítico 410 NiMo. Alguns parâmetros de soldagem foram mantidos constantes como a composição do gás e vazão, quantidade de cordões, corrente de pico e tempo de pico entre outros, enquanto corrente média, frequência de pulsação, velocidade de soldagem e DBCP são variados em três níveis, conforme método de TAGUCHI (L9) visando reduzir o número combinações. Portanto, a análise de variância foi aplicada nos resultados e estatisticamente a corrente média e a distância bico de contato peça foram as variáveis que mais influenciaram as respostas obtidas. O coeficiente de determinação ou R2 da regressão linear simples para quatro modelos foram acima de 80%, enquanto que nos sinais elétricos ficou entre 85 e 97%. A maior largura obtida foi de 11,49 mm na corrente média de 230 A, velocidade de soldagem de 300 mm/min, distancia bico de contato peça de 30mm e frequência de pulsação de 30,30Hz.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Moreno, J. R. S., Neves, A. C., Corrêa, C. A., & Gonçalves, J. F. S. (2024). PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO. Revista SODEBRAS, 1(Especial). https://doi.org/10.29367/pbg2z894

MLA 9

Moreno, João Roberto Sartori, et al. “PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO.” Revista SODEBRAS, vol. 1, no. Especial, 2024. https://doi.org/10.29367/pbg2z894.

Chicago

Moreno, João Roberto Sartori, Alisson Caetano Neves, Celso Alves Corrêa, and Janaina Fracaro Souza Gonçalves. 2024. “PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO.” Revista SODEBRAS 1 (Especial). https://doi.org/10.29367/pbg2z894.

Harvard

Moreno, J. R. S. et al. (2024) ‘PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO’, Revista SODEBRAS, 1(Especial). doi:10.29367/pbg2z894.

IEEE

J. R. S. Moreno, A. C. Neves, C. A. Corrêa, and J. F. S. Gonçalves, “PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO,” Revista SODEBRAS, vol. 1, no. Especial, 2024, doi: 10.29367/pbg2z894.

BibTeX

@article{moreno2024proposta,
  title     = {{PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO}},
  author    = {Moreno, João Roberto Sartori and Neves, Alisson Caetano and Corrêa, Celso Alves and Gonçalves, Janaina Fracaro Souza},
  journal   = {Revista SODEBRAS},
  year      = {2024},
  volume    = {1},
  number    = {Especial},
  doi       = {10.29367/pbg2z894},
  url       = {https://doi.org/10.29367/pbg2z894}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • flux-cored arc welding
  • pulsed current welding
  • weld width
  • weld reinforcement
  • weld penetration
  • welding current
  • welding voltage
  • welding speed

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Moreno, J. R. S., Neves, A. C., Corrêa, C. A., & Gonçalves, J. F. S. (2024). PROPOSTA DE UMA ANALISE DE REGRESSÃO PARA UM PROCESSO DE SOLDAGEM COM ARAME TUBULAR PULSADO ATRAVÉS DOS SINAIS DE CORRENTE E TENSÃO. Revista SODEBRAS, 1(Especial). https://doi.org/10.29367/pbg2z894

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Revista SODEBRAS: sign in and open the PDF from this page.

Who wrote this paper?

João Roberto Sartori Moreno, Alisson Caetano Neves, Celso Alves Corrêa, Janaina Fracaro Souza Gonçalves.

What is the DOI of this paper?

10.29367/pbg2z894, permanently at https://doi.org/10.29367/pbg2z894. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.