Journal article · 2017 · Open access

Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties

S. Flege, Ruriko Hatada, Andreas Hanauer, Wolfgang J. Ensinger, Takao Morimura, Koumei Baba

Advances in Materials Science and Engineering, 2017, 1–8 · Published 1 January 2017 · DOI 10.1155/2017/9082164

Open PDFView at the publisherCite this paper

In brief

“Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties” is a 2017 journal article by S. Flege and 5 co-authors, published in Advances in Materials Science and Engineering. OpenAlex counts 18 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advances in Materials Science and Engineering.

Citations
18
Most cited in
2019 (4)
Field-weighted impact
1.06
References
47
Authors
6

Abstract

Metal-containing diamond-like carbon (Me-DLC) films were prepared by a combination of plasma source ion implantation (PSII) and reactive magnetron sputtering. Two metals were used that differ in their tendency to form carbide and possess a different sputter yield, that is, Cu with a relatively high sputter yield and Ti with a comparatively low one. The DLC film preparation was based on the hydrocarbon gas ethylene (C2H4). The preparation technique is described and the parameters influencing the metal content within the film are discussed. Film properties that are changed by the metal addition, such as structure, electrical resistivity, and friction coefficient, were evaluated and compared with those of pure DLC films as well as with literature values for Me-DLC films prepared with a different hydrocarbon gas or containing other metals.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Flege, S., Hatada, R., Hanauer, A., Ensinger, W. J., Morimura, T., & Baba, K. (2017). Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties. Advances in Materials Science and Engineering, 2017, 1–8. https://doi.org/10.1155/2017/9082164

MLA 9

Flege, S., et al. “Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties.” Advances in Materials Science and Engineering, vol. 2017, 2017, pp. 1–8. https://doi.org/10.1155/2017/9082164.

Chicago

Flege, S., Ruriko Hatada, Andreas Hanauer, Wolfgang J. Ensinger, Takao Morimura, and Koumei Baba. 2017. “Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties.” Advances in Materials Science and Engineering 2017: 1–8. https://doi.org/10.1155/2017/9082164.

Harvard

Flege, S. et al. (2017) ‘Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties’, Advances in Materials Science and Engineering, 2017, pp. 1–8. doi:10.1155/2017/9082164.

IEEE

S. Flege, R. Hatada, A. Hanauer, W. J. Ensinger, T. Morimura, and K. Baba, “Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–8, 2017, doi: 10.1155/2017/9082164.

BibTeX

@article{flege2017preparation,
  title     = {{Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties}},
  author    = {Flege, S. and Hatada, Ruriko and Hanauer, Andreas and Ensinger, Wolfgang J. and Morimura, Takao and Baba, Koumei},
  journal   = {Advances in Materials Science and Engineering},
  year      = {2017},
  volume    = {2017},
  pages     = {1--8},
  doi       = {10.1155/2017/9082164},
  url       = {https://doi.org/10.1155/2017/9082164}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201822
201944
202044
202222
202344
202611

Its field-weighted citation impact is 1.06: it has been cited 1.06 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research

  • plasma immersion ion implantation
  • reactive magnetron sputtering
  • copper
  • titanium
  • sputter yield
  • ethylene
  • metal content
  • electrical resistivity

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Flege, S., Hatada, R., Hanauer, A., Ensinger, W. J., Morimura, T., & Baba, K. (2017). Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties. Advances in Materials Science and Engineering, 2017, 1–8. https://doi.org/10.1155/2017/9082164

How many times has this paper been cited?

18 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advances in Materials Science and Engineering: sign in and open the PDF from this page.

Who wrote this paper?

S. Flege, Ruriko Hatada, Andreas Hanauer, Wolfgang J. Ensinger, Takao Morimura, Koumei Baba.

What is the DOI of this paper?

10.1155/2017/9082164, permanently at https://doi.org/10.1155/2017/9082164. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.