Journal article · 2012 · Open access
Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge
Transactions of the Materials Research Society of Japan, 37(2), 227–231 · Published 1 January 2012 · DOI 10.14723/tmrsj.37.227
In brief
“Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge” is a 2012 journal article by Ruriko Hatada and 4 co-authors, published in Transactions of the Materials Research Society of Japan. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at Transactions of the Materials Research Society of Japan.
- Citations
- 0
- References
- 27
- Authors
- 5
Abstract
High hardness diamond-like carbon (DLC) films with good adhesion can be prepared by plasma source ion implantation in combination with radio frequency glow discharge plasma. Acetylene gas was used as the source gas to deposit the DLC films. Either pulses of -18 kV with a repetition rate of 1 kHz or DC voltages from -0.5 to -3 kV were applied to the substrate holder. A radio frequency (RF) of 13.56 MHz was applied to a counter electrode to generate a glow discharge plasma. The films were deposited on austenitic type stainless steel SUS304 as well as silicon wafers and characterized regarding thickness and surface morphology by cross-sectional SEM and by AFM, respectively. The chemical structure was investigated by Raman spectroscopy. The hardness of the films was evaluated by an indentation method. Furthermore, a ball-on-disc test was employed to obtain information about the frictional properties and sliding wear resistance of the films. The deposition rates of the films were enhanced by the RF discharge. The ID/IG value varied, depending on the deposition condition, in the range of 0.49 to 2.0. The hardness of the DLC films was around 19 GPa for the film deposited without RF and up to 26 GPa for the films deposited with RF discharge. A low friction coefficient was derived for all films prepared in this study, with lowest values of 0.04.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Hatada, R., Baba, K., Flege, S., Nakao, S., & Ensinger, W. J. (2012). Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge. Transactions of the Materials Research Society of Japan, 37(2), 227–231. https://doi.org/10.14723/tmrsj.37.227
MLA 9
Hatada, Ruriko, et al. “Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge.” Transactions of the Materials Research Society of Japan, vol. 37, no. 2, 2012, pp. 227–231. https://doi.org/10.14723/tmrsj.37.227.
Chicago
Hatada, Ruriko, Koumei Baba, S. Flege, S. Nakao, and Wolfgang J. Ensinger. 2012. “Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge.” Transactions of the Materials Research Society of Japan 37 (2): 227–231. https://doi.org/10.14723/tmrsj.37.227.
Harvard
Hatada, R. et al. (2012) ‘Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge’, Transactions of the Materials Research Society of Japan, 37(2), pp. 227–231. doi:10.14723/tmrsj.37.227.
IEEE
R. Hatada, K. Baba, S. Flege, S. Nakao, and W. J. Ensinger, “Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge,” Transactions of the Materials Research Society of Japan, vol. 37, no. 2, pp. 227–231, 2012, doi: 10.14723/tmrsj.37.227.
BibTeX
@article{hatada2012preparation,
title = {{Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge}},
author = {Hatada, Ruriko and Baba, Koumei and Flege, S. and Nakao, S. and Ensinger, Wolfgang J.},
journal = {Transactions of the Materials Research Society of Japan},
year = {2012},
volume = {37},
number = {2},
pages = {227--231},
doi = {10.14723/tmrsj.37.227},
url = {https://doi.org/10.14723/tmrsj.37.227}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research
- diamond-like carbon films
- plasma immersion ion implantation
- RF glow discharge
- acetylene
- film hardness
- friction coefficient
- sliding wear resistance
- deposition rate
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Hatada, R., Baba, K., Flege, S., Nakao, S., & Ensinger, W. J. (2012). Preparation of Diamond-like Carbon Films by Plasma Source Ion Implantation with External Glow Discharge. Transactions of the Materials Research Society of Japan, 37(2), 227–231. https://doi.org/10.14723/tmrsj.37.227
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Transactions of the Materials Research Society of Japan: sign in and open the PDF from this page.
Who wrote this paper?
Ruriko Hatada, Koumei Baba, S. Flege, S. Nakao, Wolfgang J. Ensinger.
What is the DOI of this paper?
10.14723/tmrsj.37.227, permanently at https://doi.org/10.14723/tmrsj.37.227. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.