Journal article · 2014 · Open access
Preparation and Mechanical Characterization of Amorphous B-C Films
Advanced materials research, 970, 124–127 · Published 1 June 2014 · DOI 10.4028/www.scientific.net/amr.970.124
In brief
“Preparation and Mechanical Characterization of Amorphous B-C Films” is a 2014 journal article by Shahira Liza and 3 co-authors, published in Advanced materials research. OpenAlex counts 1 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.
- Citations
- 1
- Most cited in
- 2015 (1)
- Field-weighted impact
- 0.28
- References
- 12
- Authors
- 4
Abstract
This study has demonstrated that trimethylboron, B(CH3)3 is a suitable boron source material for the fabrication amorphous boron carbide (a-BC:H) films. a-BC:H films were deposited by pluse plasma chemical vapor deposition on a silicon substrate (100) with different gas pressures and gas flow rates at constant voltage, -5 kV . The grown a-BC:H films were found to be porous surface and their thickness were in the range of 0.95 to 1.56 μm for 3 h of deposition time. Results indicated that the boron contents, morphologies and mechanical properties of the a-BC:H films were dependent on the gas pressures and gas flow rate. The increased of boron content will introduce more porous film surface. The effect of boron content on the mechanical properties such as hardness, Youngs modulus, and wear resistance were discussed. The good quality film is obtained from B(CH3)3 at 5 Pa and gas flow rate of 15 cm3/min which boron to carbon atomic ratio is 0.43. This film has lower friction coefficient (0.3) sliding against stainless steel ball, high hardness (8.1 GPa) and Youngs modulus (62.2 GPa).
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liza, S., Akasaka, H., Nakano, M., & Ohtake, N. (2014). Preparation and Mechanical Characterization of Amorphous B-C Films. Advanced materials research, 970, 124–127. https://doi.org/10.4028/www.scientific.net/amr.970.124
MLA 9
Liza, Shahira, et al. “Preparation and Mechanical Characterization of Amorphous B-C Films.” Advanced materials research, vol. 970, 2014, pp. 124–127. https://doi.org/10.4028/www.scientific.net/amr.970.124.
Chicago
Liza, Shahira, Hiroki Akasaka, Masayuki Nakano, and Naoto Ohtake. 2014. “Preparation and Mechanical Characterization of Amorphous B-C Films.” Advanced materials research 970: 124–127. https://doi.org/10.4028/www.scientific.net/amr.970.124.
Harvard
Liza, S. et al. (2014) ‘Preparation and Mechanical Characterization of Amorphous B-C Films’, Advanced materials research, 970, pp. 124–127. doi:10.4028/www.scientific.net/amr.970.124.
IEEE
S. Liza, H. Akasaka, M. Nakano, and N. Ohtake, “Preparation and Mechanical Characterization of Amorphous B-C Films,” Advanced materials research, vol. 970, pp. 124–127, 2014, doi: 10.4028/www.scientific.net/amr.970.124.
BibTeX
@article{liza2014preparation,
title = {{Preparation and Mechanical Characterization of Amorphous B-C Films}},
author = {Liza, Shahira and Akasaka, Hiroki and Nakano, Masayuki and Ohtake, Naoto},
journal = {Advanced materials research},
year = {2014},
volume = {970},
pages = {124--127},
doi = {10.4028/www.scientific.net/amr.970.124},
url = {https://doi.org/10.4028/www.scientific.net/amr.970.124}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- amorphous boron carbide
- trimethylboron
- plasma-enhanced chemical vapor deposition
- boron sources
- gas pressure
- gas flow rate
- film porosity
- boron-to-carbon ratio
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liza, S., Akasaka, H., Nakano, M., & Ohtake, N. (2014). Preparation and Mechanical Characterization of Amorphous B-C Films. Advanced materials research, 970, 124–127. https://doi.org/10.4028/www.scientific.net/amr.970.124
How many times has this paper been cited?
1 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced materials research: sign in and open the full text from this page.
Who wrote this paper?
Shahira Liza, Hiroki Akasaka, Masayuki Nakano, Naoto Ohtake.
What is the DOI of this paper?
10.4028/www.scientific.net/amr.970.124, permanently at https://doi.org/10.4028/www.scientific.net/amr.970.124. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.