Dissertation · 2012 · Open access
Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production
Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · Published 1 February 2012
In brief
“Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production” is a 2012 dissertation by Sudarno Achmad Solichin, published in Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia). OpenAlex counts 0 citations as of 19 November 2026. It is open access: the full text is free to read at Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia).
- Citations
- 0
- References
- 2
- Authors
- 1
Abstract
Dry reforming of methane with carbon dioxide (DRMC) has received great attention,as the process can utilize the two greenhouse gases of CH4-CO2 and produce valuable syngas. The syngas produced from this process has H2/CO = ~1, which is more compatible for various chemical and liquid fuel syntheses. However, carbon formation that leads to the catalyst deactivation is the main obstacle of DRMC process. This study is aimed to develop Ni-based catalysts with high activity, stability and high resistance to the carbon formation. This work studies the effects of different amount of promoter “ceria” loading and different preparation method of supports and catalysts. In the first study, a series of modified CeO2-SiO2 (CS) supports with different loading of ceria (CeO2) were prepared via deposition precipitation (DP). For comparison, SiO2 and CeO2 were also used as supports. The Ni (5wt.%) catalysts were synthesized using impregnation method. Several characterizations of energy dispersive X-ray fluorescence (EDXRF), N2 adsorption-desorption, X-ray diffraction (XRD), H2 temperature-programmed reduction (H2-TPR), CO2 temperature programmed desorption (CO2-TPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermal gravimetric analysis (TGA) were conducted to analyze the physico-chemical properties of the prepared samples as well as to identify the carbon formation of the used catalysts. The results showed that the properties of Ni/xCS catalysts were superior to the Ni/SiO2 and Ni/CeO2 catalysts, in terms of particle sizes, Ni dispersion, reducibility and basicity. The catalytic evaluation of DRMC showed that ceria addition on the Ni-supported catalysts influenced the catalytic performances and hindered the carbon formation significantly. Among these catalysts, Ni/9CS exhibited the best properties with high catalytic performance, high stability and low carbon deposition, thus it was considered as the best catalyst with the optimal amount of ceria. For the second study, four kinds of CeO2-SiO2 (CS) supports have been synthesized via different methods, i.e. deposition precipitation (DP), Impregnation (Imp), Sol-gel (SG) and ball milling (BM). Supported Ni (5 wt.%) catalysts were also prepared via impregnation. In addition, two other catalysts, denoted as Ni/CS-DP2 and Ni/CS-D, were prepared by impregnation of CS-DP support and co-impregnation of Ni and Ce on silica with higher temperature of catalyst calcination (700 oC). The characterization results showed that the different method gave significant different physico-chemical properties, catalytic performance and coking resistant. It was found that Ni/CS-DP1 and Ni/CS-DP2 showed the excellent activity and stability, since they have good properties (morphology, reducibility and basicity as well as Ni particle size). The order of catalyst activities is Ni/CS-DP2 > Ni/CS-DP1 >Ni/CS-Imp > Ni/CS-D > Ni/CS-BM and Ni/CS-SG. However, in term…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Solichin, S. A. (2012). Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production. Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia). http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf
MLA 9
Solichin, Sudarno Achmad. “Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production.” Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia), 2012. http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf.
Chicago
Solichin, Sudarno Achmad. 2012. “Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production.” Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia). http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf.
Harvard
Solichin, S. A. (2012) ‘Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production’, Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia). Available at: http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf.
IEEE
S. A. Solichin, “Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production,” Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia), 2012.
BibTeX
@phdthesis{solichin2012preparation,
title = {{Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production}},
author = {Solichin, Sudarno Achmad},
year = {2012},
url = {http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
- ceria promoter
- syngas production
- carbon deposition
- catalyst deactivation
- ceria loading
- catalyst support preparation
- deposition-precipitation
- impregnation
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Solichin, S. A. (2012). Preparation and evaluation of Ni/CeOշ-SiOշ catalyst for dry reforming of methane with carbon dioxide in syngas production. Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia). http://psasir.upm.edu.my/id/eprint/32219/1/FS%202012%2018R.pdf
How many times has this paper been cited?
0 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia): sign in and open the PDF from this page.
Who wrote this paper?
Sudarno Achmad Solichin.
Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.