Book chapter · 2016 · Open access

Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition

Chang‐Seop Lee, Yura Hyun

InTech eBooks · Published 31 August 2016 · DOI 10.5772/63755

Free PDFView at the publisherCite this paper

In brief

“Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition” is a 2016 book chapter by Chang‐Seop Lee and Yura Hyun, published in InTech eBooks. OpenAlex counts 8 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at InTech eBooks.

Citations
8
Most cited in
2022 (2)
Field-weighted impact
0.86
References
22
Authors
2

Abstract

Hydrocarbon gas or carbon monoxide was pyrolyzed by chemical vapor deposition (CVD), and carbon nanofiber (CNF) synthesis was performed using transition metals such as Ni, Fe, and Co as catalysts. When synthesizing carbon nanofibers using the CVD method, experimental variables are temperature, catalysts, source gas, etc. Especially, the particle size of the catalyst is the most important factor in determining the diameter of carbon nanofibers. Hydrocarbon gases, such as CH4, C2H4, benzene, and toluene are used as the carbon source, and in addition to these reaction gases, nonreactive gases such as H2, Ar, and N2 gases are used for transportation. Synthesis occurs at a synthesis temperature of 600–900°C, and catalyst metals such as Ni, Co, and Fe are definitely required when synthesizing CNFs. Therefore, it is possible to synthesize CNFs in selective areas through selective deposition of such catalyst metals. In this study, CNFs were synthesized by CVD. Ethylene gas was employed as the carbon source for synthesis of CNFs with H2 as the promoting gas and N2 as the balancing gas. Synthesized CNFs can be used in various applications, such as composite materials, electromagnetic wave shielding materials, ultrathin display devices, carbon semiconductors, and anode materials of Li secondary batteries. In particular, there is an increasing demand for light-weight, small-scale, and high-capacity batteries for portable electronic devices, such as notebook computers or smartphones along with the recent issue of fossil energy depletion. Accordingly, CNFs and their silicon-series composites are receiving attention for use as anode materials for lithium secondary batteries that are eco-friendly, light weight, and high capacity.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lee, C., & Hyun, Y. (2016). Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition. InTech eBooks. https://doi.org/10.5772/63755

MLA 9

Lee, Chang‐Seop, and Yura Hyun. “Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition.” InTech eBooks, 2016. https://doi.org/10.5772/63755.

Chicago

Lee, Chang‐Seop and Yura Hyun. 2016. “Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition.” InTech eBooks. https://doi.org/10.5772/63755.

Harvard

Lee, C. and Hyun, Y. (2016) ‘Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition’, InTech eBooks. doi:10.5772/63755.

IEEE

C. Lee and Y. Hyun, “Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition,” InTech eBooks, 2016, doi: 10.5772/63755.

BibTeX

@incollection{lee2016preparation,
  title     = {{Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition}},
  author    = {Lee, Chang‐Seop and Hyun, Yura},
  booktitle = {InTech eBooks},
  year      = {2016},
  doi       = {10.5772/63755},
  url       = {https://doi.org/10.5772/63755}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
202011
202111
202222
202322
202611

Its field-weighted citation impact is 0.86: it has been cited 0.86 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites

  • carbon nanofibers
  • chemical vapor deposition
  • transition metal catalysts
  • nickel catalysts
  • iron catalysts
  • cobalt catalysts
  • ethylene carbon source
  • nanofiber diameter control

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Lee, C., & Hyun, Y. (2016). Preparation and Characterization of Carbon Nanofibers and its Composites by Chemical Vapor Deposition. InTech eBooks. https://doi.org/10.5772/63755

How many times has this paper been cited?

8 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at InTech eBooks.

Who wrote this paper?

Chang‐Seop Lee, Yura Hyun.

What is the DOI of this paper?

10.5772/63755. The permanent link is https://doi.org/10.5772/63755.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.