Dissertation · 2024 · Open access

Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS

K. Berton

LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 15 February 2024

Open full textCite this paper

In brief

“Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS” is a 2024 dissertation by K. Berton, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).

Citations
1
Most cited in
2025 (1)
Authors
1

Abstract

The concrete deformation modulus is a crucial mechanical property used in structural design and serviceability limit state checks for structures. Although NBR 6118 (ABNT, 2023) currently standardizes equations to predict the concrete deformation modulus, focusing on coarse aggregate type and compressive strength, previous research indicates the influence of other factors, such as coarse aggregate properties, relative paste volume, among others. This study aims to deepen the understanding of the behavior of the concrete deformation modulus by proposing a set of specific correlation equations for Portland cement concretes produced with materials available in the city of Santa Maria – RS. To achieve this, eight concrete mix families produced by a local concrete producer were analyzed. Each family consisted of a low, intermediate, and high mix in terms of the cement-to-dry-materials ratio (m), intended for conventional, wall, and floor uses, totaling 24 formulations, with or without fly ash. All concretes were produced using the same type of cement and the same nature of fine and coarse aggregates. The experimental procedure, conducted in partnership with the local concrete producer, included mechanical tests followed by statistical analysis of the results. The study aimed to determine the most influential properties on compressive strength and deformation modulus. The most influential factors on compressive strength were the water-to-binder ratio (w/b) and the dry materials content. Regarding the behavior of the deformation modulus, significant factors were compressive strength, dry materials content, relative paste volume (RPV), and relative aggregate volume (RAV). Comparison with the normative equation (NBR 6118, 2023) revealed an overestimation of the deformation modulus results for the studied mixtures. To make the developed model applicable for predicting the behavior of local concretes, the prediction equations were simplified, considering only the concrete compressive strength as a variable. Therefore, the models were segmented into three equations suitable for conventional, wall, and floor mixes, taking into account the peculiarities of each mix. The validation of the proposed equations was performed using statistical parameters, confirming their applicability.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Berton, K. (2024). Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.ufsm.br/handle/1/31900

MLA 9

Berton, K. “Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2024. http://repositorio.ufsm.br/handle/1/31900.

Chicago

Berton, K. 2024. “Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.ufsm.br/handle/1/31900.

Harvard

Berton, K. (2024) ‘Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: http://repositorio.ufsm.br/handle/1/31900.

IEEE

K. Berton, “Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2024.

BibTeX

@phdthesis{berton2024prediction,
  title     = {{Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS}},
  author    = {Berton, K.},
  year      = {2024},
  url       = {http://repositorio.ufsm.br/handle/1/31900}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research

  • Portland cement concrete
  • prediction model
  • compressive strength
  • water-to-binder ratio
  • fly ash
  • NBR 6118
  • Santa Maria, Rio Grande do Sul

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Berton, K. (2024). Prediction model for static deformation module of Portland cement concretes produced in Santa Maria - RS. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.ufsm.br/handle/1/31900

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.

Who wrote this paper?

K. Berton.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.