Dissertation · 2025 · Open access
Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm
MacSphere (McMaster University) · Published 1 January 2025 · DOI 10.71548/23020
In brief
“Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm” is a 2025 dissertation by Chen, Yin-Chi, published in MacSphere (McMaster University). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at MacSphere (McMaster University).
- Citations
- 0
- Authors
- 1
Abstract
This thesis presents the design, fabrication, and experimental validation of a positive-pressure origami-inspired soft pneumatic actuator (PP-OSPA) and its integration into a 4-degrees-of-freedom PP OSPA driven robotic arm (PRA). A novel self-tightening endcap and modular external ribs were introduced to enable safe operation at positive pressure while simplifying assembly. The fabrication process was streamlined using a redesigned mold, better controlled heating, and a rotating heat-treatment phase to improve safety and reduce fabrication difficulty. Four actuator lengths were built and characterized. Measured stroke percentages decreased as actuator length increased. Blocked-force testing up to 400 kPa yielded maximum forces of 642–702 N and peak force-to-weight ratios up to 270.4, surpassing prior OSPA baselines. A durability test of two 8-unit actuators cycled a 25.3 kg load for 19,000 ten-second cycles with negligible degradation until an external-rib fracture caused leakage, identifying the rib as the life-limiting element under these conditions. A PRA was designed, manufactured and tested to demonstrate the practicality of the PP-OSPAs. Structural plates and key components were sized by FEA, and hand calculations. Using topology optimization, nine parts were weight-reduced with an average mass reduction of 26.3%. Assembled arm tests with a 5.8 kg payload showed that all four joints produced end-effector linear accelerations exceeding the acceleration target. The results also identified significant torque losses due to friction. Collectively, the PP-OSPA design, its streamlined manufacturing, and its validation in a robotic arm, demonstrate a viable path to safe, lightweight, and high-force soft actuation for collaborative manipulation, while clarifying design trade-offs and directions for future research.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yin-Chi, C. (2025). Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm. MacSphere (McMaster University). https://doi.org/10.71548/23020
MLA 9
Yin-Chi, Chen,. “Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm.” MacSphere (McMaster University), 2025. https://doi.org/10.71548/23020.
Chicago
Yin-Chi, Chen,. 2025. “Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm.” MacSphere (McMaster University). https://doi.org/10.71548/23020.
Harvard
Yin-Chi, C. (2025) ‘Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm’, MacSphere (McMaster University). doi:10.71548/23020.
IEEE
C. Yin-Chi, “Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm,” MacSphere (McMaster University), 2025, doi: 10.71548/23020.
BibTeX
@phdthesis{yinchi2025pneumatic,
title = {{Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm}},
author = {Yin-Chi, Chen,},
year = {2025},
doi = {10.71548/23020},
url = {https://doi.org/10.71548/23020}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft pneumatic actuators
- soft robotics
- robot manipulators
- actuator fabrication
- mold design
- heat treatment
- stroke length
- blocking force
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yin-Chi, C. (2025). Pneumatic Positive-Pressure Soft Actuator: Design, Fabrication, and Integration into a Novel Robotic Arm. MacSphere (McMaster University). https://doi.org/10.71548/23020
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at MacSphere (McMaster University): sign in and open the full text from this page.
Who wrote this paper?
Chen, Yin-Chi.
What is the DOI of this paper?
10.71548/23020, permanently at https://doi.org/10.71548/23020. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.