Journal article · 2013 · Open access

Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel

Luis Henry Moreno, Julio Cesar Caicedo, Gilberto Bejarano Gaitán, Federico García Martínez, Pedro Prieto Pulido

Revista Facultad de Ingeniería Universidad de Antioquia, 85–94 · Published 27 February 2013 · DOI 10.17533/udea.redin.14602

Open PDFView at the publisherCite this paper

In brief

“Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel” is a 2013 journal article by Luis Henry Moreno and 4 co-authors, published in Revista Facultad de Ingeniería Universidad de Antioquia. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read at Revista Facultad de Ingeniería Universidad de Antioquia.

Citations
0
References
16
Authors
5

Abstract

In the present work wear resistance of 4 μm uncoated tungsten carbide inserts (WC) and coated with [TiN/TiAlN]n multinanolayered or with commercial TiCN-Al2O3-TiN monolayers (TINAL) are examined. Life tests, cutting area temperature analysis, surface roughness measurements on work pieces, roughness measurements on the attacked surface, contact track analysis between chip-insert and chemical composition analysis (EDS) were carried out. Mechanical tests were conducted on AISI 4340 steel parts using cutting regime and applying high speed cutting (HSC). Machining results showed that for a distance of 8,000 m the inserts coated with 300 bilayers exhibited wear values of 0.117 mm, inserts coated with 200 bilayers showed values of 0.138 mm and those coated with TINAL presented wear values of 0.174 mm. Moreover, the temperature values for cutting speed at 176.6 m/mim for 300 bilayers was 522.6 oC, for 200 bilayers was 721.4 oC and 1,327.6 oC for inserts coated with TINAL. Lower temperatures, caused by a lower friction coeffi cient and cutting force, contribute to life-time increasing at WC inserts.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Moreno, L. H., Caicedo, J. C., Gaitán, G. B., Martínez, F. G., & Pulido, P. P. (2013). Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel. Revista Facultad de Ingeniería Universidad de Antioquia, 85–94. https://doi.org/10.17533/udea.redin.14602

MLA 9

Moreno, Luis Henry, et al. “Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel.” Revista Facultad de Ingeniería Universidad de Antioquia, no. 58, 2013, pp. 85–94. https://doi.org/10.17533/udea.redin.14602.

Chicago

Moreno, Luis Henry, Julio Cesar Caicedo, Gilberto Bejarano Gaitán, Federico García Martínez, and Pedro Prieto Pulido. 2013. “Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel.” Revista Facultad de Ingeniería Universidad de Antioquia (58): 85–94. https://doi.org/10.17533/udea.redin.14602.

Harvard

Moreno, L. H. et al. (2013) ‘Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel’, Revista Facultad de Ingeniería Universidad de Antioquia, pp. 85–94. doi:10.17533/udea.redin.14602.

IEEE

L. H. Moreno, J. C. Caicedo, G. B. Gaitán, F. G. Martínez, and P. P. Pulido, “Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel,” Revista Facultad de Ingeniería Universidad de Antioquia, no. 58, pp. 85–94, 2013, doi: 10.17533/udea.redin.14602.

BibTeX

@article{moreno2013performance,
  title     = {{Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel}},
  author    = {Moreno, Luis Henry and Caicedo, Julio Cesar and Gaitán, Gilberto Bejarano and Martínez, Federico García and Pulido, Pedro Prieto},
  journal   = {Revista Facultad de Ingeniería Universidad de Antioquia},
  year      = {2013},
  number    = {58},
  pages     = {85--94},
  doi       = {10.17533/udea.redin.14602},
  url       = {https://doi.org/10.17533/udea.redin.14602}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • tungsten carbide inserts
  • AISI 4340 steel
  • hardened steel machining
  • high-speed machining
  • tool wear resistance
  • cutting temperature
  • surface roughness
  • tool life

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Moreno, L. H., Caicedo, J. C., Gaitán, G. B., Martínez, F. G., & Pulido, P. P. (2013). Performance of WC- inserts coated with nanometric [TiN/TiAlN]n- multilayer for the cutting processing of hardened AISI 4340 steel. Revista Facultad de Ingeniería Universidad de Antioquia, 85–94. https://doi.org/10.17533/udea.redin.14602

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Revista Facultad de Ingeniería Universidad de Antioquia: sign in and open the PDF from this page.

Who wrote this paper?

Luis Henry Moreno, Julio Cesar Caicedo, Gilberto Bejarano Gaitán, Federico García Martínez, Pedro Prieto Pulido.

What is the DOI of this paper?

10.17533/udea.redin.14602, permanently at https://doi.org/10.17533/udea.redin.14602. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.