Journal article · 2026 · Open access

Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel

Sarah Christine Bermanschläger, Christian Baumann, Julian Brünner, S. Kolozsvári, P.H. Mayrhofer, Friedrich Bleicher

CIRP journal of manufacturing science and technology, 66, 31–40 · Published 6 February 2026 · DOI 10.1016/j.cirpj.2026.01.013

Open full textCite this paper

In brief

“Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel” is a 2026 journal article by Sarah Christine Bermanschläger and 5 co-authors, published in CIRP journal of manufacturing science and technology. OpenAlex counts 3 citations as of 17 November 2026, which puts it in the top 4% of works published in 2026 by citations. It is open access under a CC BY licence: the full text is free to read at CIRP journal of manufacturing science and technology.

Citations
3
Most cited in
2026 (3)
Field-weighted impact
4.72
References
33
Authors
6

Abstract

Developing advanced hard coatings is crucial for improving machining performance. This study evaluates a newly created (Ti,Al,Ta,Ce)N coating realized by physical vapor deposition. Coated cemented carbide inserts were evaluated in dry longitudinal turning on C45E, benchmarked against TiN and (Ti,Al) at two cutting speeds (90 and 300 m·min −1 ) and two feeds (0.1 and 0.2 mm·rev −1 ). Tool wear, cutting forces, and rake face temperatures were monitored. At the cutting parameters of 300 m·min −1 and 0.2 mm·rev −1 , the (Ti,Al,Ta,Ce)N coating outperformed (Ti,Al)N at a tool life of 750 m, reducing tool wear by 73 % and cutting forces by 11 %. • Comparison of three coating materials: TiN, (Ti,Al)N, (Ti,Al,Ta,Ce)N. • Dry longitudinal turning test with two different cutting speeds and feed rates. • Criteria: flank-wear land width, cutting force, rake face temperature. • (Ti,Al,Ta,Ce)N coatings proved to be superior to (Ti,Al)N and TiN coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bermanschläger, S. C., Baumann, C., Brünner, J., Kolozsvári, S., Mayrhofer, P., & Bleicher, F. (2026). Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel. CIRP journal of manufacturing science and technology, 66, 31–40. https://doi.org/10.1016/j.cirpj.2026.01.013

MLA 9

Bermanschläger, Sarah Christine, et al. “Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel.” CIRP journal of manufacturing science and technology, vol. 66, 2026, pp. 31–40. https://doi.org/10.1016/j.cirpj.2026.01.013.

Chicago

Bermanschläger, Sarah Christine, Christian Baumann, Julian Brünner, S. Kolozsvári, P.H. Mayrhofer, and Friedrich Bleicher. 2026. “Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel.” CIRP journal of manufacturing science and technology 66: 31–40. https://doi.org/10.1016/j.cirpj.2026.01.013.

Harvard

Bermanschläger, S. C. et al. (2026) ‘Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel’, CIRP journal of manufacturing science and technology, 66, pp. 31–40. doi:10.1016/j.cirpj.2026.01.013.

IEEE

S. C. Bermanschläger, C. Baumann, J. Brünner, S. Kolozsvári, P. Mayrhofer, and F. Bleicher, “Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel,” CIRP journal of manufacturing science and technology, vol. 66, pp. 31–40, 2026, doi: 10.1016/j.cirpj.2026.01.013.

BibTeX

@article{bermanschlager2026performance,
  title     = {{Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel}},
  author    = {Bermanschläger, Sarah Christine and Baumann, Christian and Brünner, Julian and Kolozsvári, S. and Mayrhofer, P.H. and Bleicher, Friedrich},
  journal   = {CIRP journal of manufacturing science and technology},
  year      = {2026},
  volume    = {66},
  pages     = {31--40},
  doi       = {10.1016/j.cirpj.2026.01.013},
  url       = {https://doi.org/10.1016/j.cirpj.2026.01.013}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • TiN coating
  • TiAlN coating
  • hard coatings
  • carbide inserts
  • dry machining
  • longitudinal turning
  • C45E steel
  • tool wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Bermanschläger, S. C., Baumann, C., Brünner, J., Kolozsvári, S., Mayrhofer, P., & Bleicher, F. (2026). Performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coated tools in dry machining of C45E steel. CIRP journal of manufacturing science and technology, 66, 31–40. https://doi.org/10.1016/j.cirpj.2026.01.013

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at CIRP journal of manufacturing science and technology: sign in and open the full text from this page.

Who wrote this paper?

Sarah Christine Bermanschläger, Christian Baumann, Julian Brünner, S. Kolozsvári, P.H. Mayrhofer, Friedrich Bleicher.

What is the DOI of this paper?

10.1016/j.cirpj.2026.01.013, permanently at https://doi.org/10.1016/j.cirpj.2026.01.013. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.